LTE, an initialism of long-term evolution, marketed as 4G LTE, is a standard for wireless communication of high-speed data for mobile phones and data terminals. It is based on the GSM/EDGE and UMTS/HSPA network technologies, increasing the capacity and speed using a different radio interface together with core network improvements.[1][2] The standard is developed by the 3GPP (3rd Generation Partnership Project) and is specified in its Release 8 document series, with minor enhancements described in Release 9.
LTE, an initialism of long-term evolution, marketed as 4G LTE, is a standard for wireless communication of high-speed data for mobile phones and data terminals. It is based on the GSM/EDGE and UMTS/HSPA network technologies, increasing the capacity and speed using a different radio interface together with core network improvements.[1][2] The standard is developed by the 3GPP (3rd Generation Partnership Project) and is specified in its Release 8 document series, with minor enhancements described in Release 9.
The world's first publicly available LTE service was launched by TeliaSonera in Oslo and Stockholm on December 14, 2009.[3] LTE is the natural upgrade path for carriers with both GSM/UMTS networks and CDMA networks such as Verizon Wireless, who launched the first large-scale LTE network in North America in 2010,[4][5] and au by KDDI in Japan have announced they will migrate to LTE. LTE is, therefore, anticipated to become the first truly global mobile phone standard, although the different LTE frequencies and bands used in different countries will mean that only multi-band phones will be able to use LTE in all countries where it is supported.
Although marketed as a 4G wireless service, LTE (as specified in the 3GPP Release 8 and 9 document series) does not satisfy the technical requirements the 3GPP consortium has adopted for its new standard generation, and which were originally set forth by the ITU-R organization in its IMT-Advanced specification. However, due to marketing pressures and the significant advancements that WIMAX, HSPA+ and LTE bring to the original 3G technologies, ITU later decided that LTE together with the aforementioned technologies can be called 4G technologies.[6] The LTE Advanced standard formally satisfies the ITU-R requirements to be considered IMT-Advanced.[7] And to differentiate LTE-Advanced and WiMAX-Advanced from current 4G technologies, ITU has defined them as "True 4G".[8][9]
Contents |
LTE is a standard for wireless data communications technology and an evolution of the GSM/UMTS standards. The goal of LTE was to increase the capacity and speed of wireless data networks using new DSP (digital signal processing) techniques and modulations that were developed around the turn of the millennium. A further goal was the redesign and simplification of the network architecture to an IP-based system with significantly reduced transfer latency compared to the 3G architecture. The LTE wireless interface is incompatible with 2G and 3G networks, so that it must be operated on a separate wireless spectrum.
LTE was first proposed by NTT DoCoMo of Japan in 2004, and studies on the new standard officially commenced in 2005.[10] In May 2007, the LTE/SAE Trial Initiative (LSTI) alliance was founded as a global collaboration between vendors and operators with the goal of verifying and promoting the new standard in order to ensure the global introduction of the technology as quickly as possible.[11][12] The LTE standard was finalized in December 2008, and the first publicly available LTE service was launched by TeliaSonera in Oslo and Stockholm on December 14, 2009 as a data connection with a USB modem. The LTE services were launched by major North American carriers as well, with the Samsung SCH-r900 being the world’s first LTE Mobile phone starting on September 21, 2010[13][14] and Samsung Galaxy Indulge being the world’s first LTE smartphone starting on February 10, 2011[15][16] both offered by MetroPCS and HTC ThunderBolt offered by Verizon starting on March 17 being the second LTE smartphone to be sold commercially.[17][18] In Canada, Rogers Wireless was the first to launch LTE network on July 7, 2011 offering the Sierra Wireless AirCard® 313U USB mobile broadband modem, known as the "LTE Rocket™ stick" then followed closely by mobile devices from both HTC and Samsung.[19] Initially, CDMA operators planned to upgrade to rival standards called UMB and WiMAX, but all the major CDMA operators (such as Verizon, Sprint and MetroPCS in the United States, Bell and Telus in Canada, au by KDDI in Japan, SK Telecom in South Korea and China Telecom/China Unicom in China) have announced that they intend to migrate to LTE after all. The evolution of LTE is LTE Advanced, which was standardized in March 2011.[20] Services are expected to commence in 2013.[21]
The LTE specification provides downlink peak rates of 300 Mbit/s, uplink peak rates of 75 Mbit/s and QoS provisions permitting a transfer latency of less than 5 ms in the radio access network. LTE has the ability to manage fast-moving mobiles and supports multi-cast and broadcast streams. LTE supports scalable carrier bandwidths, from 1.4 MHz to 20 MHz and supports both frequency division duplexing (FDD) and time-division duplexing (TDD). The IP-based network architecture, called the Evolved Packet Core (EPC) and designed to replace the GPRS Core Network, supports seamless handovers for both voice and data to cell towers with older network technology such as GSM, UMTS and CDMA2000.[22] The simpler architecture results in lower operating costs (for example, each E-UTRAN cell will support up to four times the data and voice capacity supported by HSPA[23]).
Much of the LTE standard addresses the upgrading of 3G UMTS to what will eventually be 4G mobile communications technology. A large amount of the work is aimed at simplifying the architecture of the system, as it transits from the existing UMTS circuit + packet switching combined network, to an all-IP flat architecture system. E-UTRA is the air interface of LTE. Its main features are:
The LTE standard only supports packet switching with its all-IP network. Voice calls in GSM, UMTS and CDMA2000 are circuit switched, so with the adoption of LTE, carriers will have to re-engineer their voice call network.[26] Three different approaches sprang up:
One additional approach which is not initiated by operators is the usage of Over-the-top content services, using applications like Skype and Google Talk to provide LTE voice service. However, now and in the foreseeable future, the voice call service is, and will still be, the main revenue source for the mobile operators. So handing the LTE voice service over completely to the OTT actors is thus something which is not expected to receive much support in the telecom industry.[27]
Most major backers of LTE preferred and promoted VoLTE from the beginning. The lack of software support in initial LTE devices as well as core network devices however led to a number of carriers promoting VoLGA (Voice over LTE Generic Access) as an interim solution.[28] The idea was to use the same principles as GAN (Generic Access Network, also known as UMA or Unlicensed Mobile Access), which defines the protocols through which a mobile handset can perform voice calls over a customer's private Internet connection, usually over wireless LAN. VoLGA however never gained much support, because VoLTE (IMS) promises much more flexible services, albeit at the cost of having to upgrade the entire voice call infrastructure. VoLTE will also require Single Radio Voice Call Continuity (SRVCC) in order to be able to smoothly perform a handover to a 3G network in case of poor LTE signal quality.[29]
While the industry has seemingly standardized on VoLTE for the future, the demand for voice calls today has led LTE carriers to introduce CSFB as a stopgap measure. When placing or receiving a voice call, LTE handsets will fall back to old 2G or 3G networks for the duration of the call.
To ensure compatibility, 3GPP demands at least AMR-NB codec (narrow band), but the recommended speech codec for VoLTE is Adaptive Multi-Rate Wideband, also known as HD Voice. This codec is mandated in 3GPP networks that support 16 kHz sampling.[30]
Fraunhofer IIS has proposed and demonstrated Full-HD Voice, an implementation of the AAC-ELD (Advanced Audio Coding – Enhanced Low Delay) codec for LTE handsets.[31] Where previous cell phone voice codecs only supported frequencies up to 3.5 kHz and upcoming wideband audio services branded as HD Voice up to 7 kHz, Full-HD Voice supports the entire bandwidth range from 20 Hz to 20 kHz. For end-to-end Full-HD Voice calls to succeed however, both the caller and recipient's handsets as well as networks have to support the feature.[32]
The LTE standard covers a range of many different bands, each of which is designated by both a frequency and a band number. In North America, 700, 800, 1900 and 1700/2100 MHz (AWS) are used (bands 4, 12, 13, 17, 25); 2500 MHz in South America; 800, 900, 1800, 2600 MHz in Europe(bands 3, 7, 20); 1800 and 2600 MHz in Asia (bands 1, 3, 5, 7, 8, 11, 13, 40); and 1800 MHz in Australia and New Zealand (bands 3, 40).[33][34][35][36][37][38] As a result, phones from one country may not work in other countries. Users will need a multi-band capable phone for roaming internationally.
According to the European Telecommunications Standards Institute's (ETSI) intellectual property rights (IPR) database, about 50 companies have declared, as of March 2012, holding essential patents covering the LTE standard.[39] The ETSI has made no investigation on the correctness of the declarations however,[39] so that "any analysis of essential LTE patents should take into account more than ETSI declarations."[40]
| Find more about LTE (telecommunication) at Wikipedia's sister projects | |
| Media from Commons | |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||