Audi A5 DTM (top)
Audi RS5 DTM R17 (middle)
Audi RS5 DTM RC3 (bottom)
|Category||Deutsche Tourenwagen Masters (Touring Cars)|
|Predecessor||Audi A4 DTM|
|Chassis||Carbon-fibre reinforced plastic monocoque|
|Suspension (front)||Double wishbones with Eibach spring and DSSV damper units to front and rear axles, actuated via pushrods|
|Suspension (rear)||As front|
|Length||4,650–5,010 mm (183–197 in)|
|Width||1,950 mm (77 in)|
|Height||1,150 mm (45 in)|
|Axle track||Max: 1,950 mm (77 in)|
|Wheelbase||2,750 mm (108 in)|
|Engine||Audi 4,000 cc (244 cu in) V8 90° naturally aspirated, front engined, longitudinally mounted|
|Transmission||Hewland 6-speed sequential semi-automatic paddle shift|
|Battery||Bosch 13 volts|
|Power||Over 500 hp (373 kW) @ 7500 rpm|
|Weight||1,100 kg (2,425 lb) (2012); 1,110 kg (2,447 lb) (2013-2014); 1,120 kg (2,469 lb) (2015-2016); 1,125 kg (2,480 lb) (2017-present) including driver + BoP weight allowance of 1,095–1,140 kg (2,414–2,513 lb)|
|Fuel||DTM-mandated Aral Ultimate unleaded 102 RON racing gasoline|
|Brakes||AP Racing carbon brake discs with 6-piston calipers and pads|
O.Z. Racing (2012-2016) later ATS (2017-present) wheels
|Notable entrants|| Team Rosberg
Audi Sport Team Abt
|Notable drivers|| Edoardo Mortara
|Debut||2012 Hockenheimring 1 Deutsche Tourenwagen Masters round|
|Constructors' Championships||3 (2014, 2016 and 2017)|
|Drivers' Championships||2 (2013 and 2017)|
The Audi 5 Series DTM (also known as the Audi A5 DTM (2012) later Audi RS5 DTM (2013-present)) is a DTM touring car constructed by the German car manufacturer Audi AG. It was developed in 2011 and has been raced in DTM seasons 2012-present. It was designed by former Audi Head of Research and Development Wolfgang Dürheimer. The A5 DTM replaced the retired Audi A4 DTM at the end of the 2011 season and based on the production Audi A5.
The first A5 DTM chassis was assembled in mid-May 2011, with the first vehicle completed in late-July. Codenamed R17 it was intended to see its first race in the 2010 DTM season. Replacing the successful A4 DTM which had been raced since 2004, the A5 had large shoes to fill. Built by Audi Sport in Ingolstadt, the completed A5 DTM was revealed at Frankfurt Motor Show on September 12, 2011.
The A5 DTM is fitted with a V8 engine rated at 340 kW (462 PS; 456 hp) and coupled to a 6-speed transmission grafted from the previous A4 DTM car. It features steering wheel-mounted paddle shifters, engine electronics (Bosch MS 5.1) and the central display from the Audi R8 LMS, larger and wider tires from Hankook, 32-gallons safety fuel tank inside carbon fiber cell, and a large rear wing. In accordance with DTM regulations, side-impact zones designed by Zylon and Rohacell are incorporated into construction of the car. The fuel tank is also integrated into the carbon fiber monocoque for greater safety and reduced fire risk.
At the beginning of the 2012 season, homologation rules for DTM cars were changed, and an increase in minimum weight from 1,050 kg (2,315 lb) to 1,110 kg (2,447 lb) was mandated.
With the homologation of the A5 DTM completed on March 1, 2012, the car's race debut was at the 2012 Hockenheimring DTM round on April 29, 2012. Audi Sport Team Abt's Mattias Ekström won the pole only.
In the 2012 DTM season lined-up eight drivers on for three teams. Mattias Ekström, Timo Scheider, Adrien Tambay and Rahel Frey start for Abt Sportsline. Phoenix Racing approached with Miguel Molina and Mike Rockenfeller. Filipe Albuquerque and Edoardo Mortara raced for Team Rosberg.
In the 2013 DTM season lined-up eight drivers on for four teams. Mattias Ekström and Jamie Green start for Abt Sportsline. Mike Rockenfeller and Miguel Molina for Phoenix Racing. Timo Scheider and Adrien Tambay start for Audi Sport Team Abt. Filipe Albuquerque and Edoardo Mortara start for Team Rosberg.
After the 2012 season, the vehicle was renamed RS5 DTM, correspond with the Audi RS5 production model. It is powered by a naturally-aspirated engine and 2xDOHC camshafts. The engine itself is a custom-built Audi 4.0 L V8 with four valves per cylinder and a 90 degree V-angle. It has a power output of approximately 460 hp (343 kW; 466 PS) and torque of 500 N·m (370 ft·lbf). Front engined and longitudinally mounted engine mounting layout, the RS5's engine is indirect fuel injected. The RS5 DTM's ECU is a Bosch Motronic MS 5.1 and other components such as the CDI ignition are also supplied by Bosch. Audi RS5 DTM's first debut during DTM preseason test at Circuit de Catalunya on March 26–28, 2013 by all Audi teams and drivers.
On March 4, 2014, the RS5 DTM was redesigned and launched during 2014 Geneva Motor Show. During development, the vehicle was codenamed "RC3."
The Audi A5 DTM is special version of the standard Audi A5 production car. It was revealed at the 2013 International Motor Show at Geneva on March 6, 2013 in celebration of Mike Rockenfeller's 2013 DTM overall victory. It includes a choice of 4 engines (2.0 TDI quattro (177 PS (130 kW)), 3.0 TDI quattro (245 PS (180 kW)), 2.0 TFSI quattro (225 PS (165 kW)), and 3.0 TFSI quattro (272 PS (200 kW))); a choice of 3 body colours (Misano red, Daytona gray and Glacier white), DTM badges on the door sill trims, fenders and the side sills; a fixed rear wing in body color, exterior mirrors in aluminum look, and 20-inch cast aluminum wheels in a 5 V-spoke design. Only 300 such vehicles were built.
As of 1 March 2017, Audi 5 Series DTM (A5 and RS5 DTM) currently participated 70 races (including non-championship race at Olympiastadion Munich) with 27 victories, 24 pole positions and 29 fastest laps.
|Wikimedia Commons has media related to Audi A5 DTM (R17).|
None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, Wikipedia, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.
All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.
The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.