| BTR-152 | |
|---|---|
BTR-152 in Yerevan, Armenia. |
|
| Type | Armored personnel carrier |
| Place of origin | |
| Service history | |
| In service | 24 March 1950 - present |
| Used by | See Operators |
| Wars | See Service History |
| Production history | |
| Designer | B. M. Fitterman |
| Designed | November 1946 - 1949[1] |
| Manufacturer | Automotive Factory No. 2 Zavod imeni Stalina (until 1956)[1] Automotive Factory No. 2 Zavod imeni Likhacheva (from 1956 to 1962)[1] |
| Produced | 1950 - 1962 |
| Number built | around 15,000 |
| Variants | See Variants |
| Specifications | |
| Weight | 9.91 tonnes[2] |
| Length | 6.55 m 6.83 m for BTR-152V |
| Width | 2.32 m |
| Height | 2.04 m (without the mg)[2] 2.36 m (with the mg)[1] 2.41 m (BTR-152V with the mg)[1] |
| Crew | 2 (+18 passengers)[3] |
|
|
|
| Armor | welded steel[4] 15 mm front[2] 9 mm sides and rear[4] 10 mm roof[4] 4 mm bottom[4] |
| Main armament |
7.62mm SGMB light machine gun (1,250 rounds) (12.7 mm DShK 1938/46 heavy machine gun (500 rounds) can be used instead)[2] |
| Secondary armament |
2x7.62mm SGMB light machine guns (1,250-1,750 rounds) on side pintel mounts (optional)[2] |
| Engine | ZIS-123 6-cylinder in-line water-cooled petrol (for variants based on ZiS-151) ZiL-137K 6-cylinder in-line petrol (for variants based on ZiL-157)[5] 110 hp (82 kW) at 3,000 rpm. (for variants based on ZiS-151) 107 hp (80 kW) (for variants based on ZiL-157)[5] |
| Power/weight | 11.1 hp/tonne (8.3 kW/tonne) 10.8 hp/tonne (8.1 kW/tonne) for BTR-152V[1] |
| Suspension | wheeled 6×6 front - 2 leaf springs and hydraulic shock absorbers. rear - equalising type with 2 leaf springs and torsion bars. |
| Ground clearance | 300 mm |
| Fuel capacity | 300 l (79 gal) |
| Operational range |
650 km (404 miles)[2] |
| Speed | 75 km/h[6] 65 km/h for BTR-152V[1] |
The BTR-152 (also known as BTR-140) was a non-amphibious Soviet wheeled armored personnel carrier (BTR stands for Bronetransporter (БТР, Бронетранспортер, literally "armoured transporter") †) that entered Soviet service in 1950. By the early 1970s it had been replaced in the infantry vehicle role by the BTR-60. However, it remained in service in the Soviet Army and the Russian Army until 1993 in a variety of other roles. It was also exported to many third World countries.
Contents |
Tanks are an essential element of armed maneuver warfare. Yet, even this high-value, powerful weapon remains vulnerable to infantry anti-tank tactics especially in urban or confined environments. Hence, infantry accompany tanks to assist in suppressing possible anti-tank action.
During the Second World War, the Soviet tacticians incorporated joint infantry and tank attacks against German forces, both serving in roles to protect the other. Performance was less than desirable as infantry lacked the armored protection and rapid mobility of the tank, and thus unarmoured troops were vulnerable to enemy fire. This led to employment of armoured infantry carriage vehicles known as APCs which overcame these shortcomings.(Perrett 1987:65)
After the war, Soviet military analysed the high infantry casualty rate of combined infantry-tank attacks and concluded the lack of APCs were a major cause. This vulnerability in maneuver warfare was given high priority to remedy. The Soviet military industrial complex had its own designs, Lend-Lease vehicles such as the M3 Half-track and newly acquired German SdKfz 251 to serve as reference. (Perrett 1987:65)
The BTR-152 was one of the first Soviet armoured infantry vehicle after the Second World War. It was developed from November 1946 at ZiS plant by a team (it included K. M. Androsow, A. P. Pietrenko, W. F. Rodionow and P. P. Czerniajew)[1] led by B. M. Fitterman. The first two prototypes were completed in May 1947 and were followed by three experimental series. The vehicle was adopted by the Soviet Army on 24 March 1950. The vehicle was based on the existing ZiS-151 truck chassis. Despite an improved engine, the addition of 5 tons of armour resulted in the vehicle having insufficient mobility.
Several upgraded versions were designed by W. F. Rodionow and N. I. Orłow[1] which later entered production. These rectified many problems such as the open roof and the mobility issue. A central tire pressure regulation system was added to allow tire pressure to be adjusted to optimize traction in varying terrain.
Production of the BTR-152 was stopped in 1962. Approximately 15,000 examples were built.
The BTR-152, based on a truck chassis, has the engine located in the front, the crew behind the engine, and an open-topped troop compartment in the rear. The vehicle has all-welded steel construction with sloped armour. The windscreen is protected by twin armoured shutters with integral vision blocks. Driver and commander enter and exit the vehicle via the doors on each side of the crew compartment. The upper part of the doors can be opened without opening the entire door, allowing both crew members a side view. Additionally both driver and commander can view the battlefield using periscopes mounted over the doors. The vehicle's armour varies from 15 mm thick on the front to 9 mm thick on the sides, to just 4 mm thick on the floor. This provides modest protection from small arms fire and small shell fragments, but does nothing against larger artillery fragments or heavy machinegun fire. The BTR-152's tires are not protected by armour and are particularly vulnerable to puncture from gunfire of all kinds. The vehicle is sometimes fitted with a winch that has a maximum capacity of 5 tonnes, and is fitted with a 70 m cable.[2][4]
The BTR-152 can tow heavy guns, transport 1.9 tonnes of cargo, or a half platoon of infantry. In the APC role, infantrymen can fire their individual weapons from the relative protection of the vehicle, and can exit through the rear doors or by jumping over the sides.[1][4][7]
The troop compartment is open-topped, although later versions were enclosed. It can be covered with a tarpaulin to protect the transported cargo or troops from rain and snow; however, it makes it unable for troops to disembark over the sides of the vehicle or mount any of the 7.62 mm SGMB light machine guns. The transported troops sit on two wooden benches. Twin doors at the rear of the hull provide access to the compartment. There are three firing ports on each side of the hull, and a further two in the rear. The driver and gunner are the only ones that have overhead protection. The BTR-152K is the only APC variant to have an armoured roof over the troop compartment and an NBC protection system. All other BTR-152 variants lack NBC protection.
The BTR-152 APC is armed with a single pintle-mounted 7.62 mm SGMB light machinegun which was a typical armament for APCs of its time. It can also mount a 12.7 mm DShK 1938/46 heavy machinegun. The machinegun can traverse 45 degrees and elevate between -6 and +24 degrees.[4]
Because the original BTR-152 APC used components from the ZiS-151, it shared that truck's maintenance problems and poor cross-country mobility. Later variants using ZiL-157 components featured more power and larger, single tires which reduced the vehicle's shortcomings but did not entirely eliminate them. Serviceability and reliability remained low.[7] The lack of an amphibious capability was also a significant weakness.
Armoured shutters controlled by the driver protect the radiator from hostile fire. Closing the shutters can result in sudden overheating of the engine during combat and can force the driver to reduce speed to avoid damaging the engine. The vehicle therefore becomes a slow, unmaneuverable target on the battlefield.[4]
The vehicle entered active service with the Soviet Army on 24 March 1950 and was first publicly shown during a parade in Moscow in 1951. It was phased out as an APC between the late 1960s and early 1970s and was replaced by the BTR-60. It remained in service with the Soviet Army and later post-soviet Russian Army until 1993 in a variety of roles, including command vehicles, mobile radio stations and ambulances. It was also exported to many Third World countries where some still remain in service.
BTR-152 first saw combat use during Hungarian Revolution of 1956. They were later used during the Six Day War in 1967. Dozens of Egyptian and Syrian BTR-152 APCs were captured by the Israeli Army. They were also used in combat during the Soviet invasion of Czechoslovakia in 1968 by the Soviet Army and other Warsaw Pact armies. They also were used in a number of local conflicts like the ones in Africa.
| Wikimedia Commons has media related to: BTR-152 |
|
|||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
From yloquen2
From yloquen2
From W.Grabar
From W.Grabar
From redskin1966
From GabrielFe...
From Alex Drennan
From LuchezarS
Here you can share your comments or contribute with more information, content, resources or links about this topic.