VIDEOS 1 TO 50

❖ Optimization Problem #1 ❖

Published: 2008/04/01

Channel: patrickJMT

Mathematical Optimization for Machine Learning

Published: 2016/05/10

Channel: Next Day Video

Optimization } 001 } Mathematical optimization } Basics }

Published: 2015/09/06

Channel: Leprofesseur }

Calculus 1 Lecture 3.7: Optimization; Max/Min Application Problems

Published: 2014/01/16

Channel: Professor Leonard

Optimization - Calculus (KristaKingMath)

Published: 2012/06/05

Channel: Krista King

Introduction to Optimization

Published: 2013/08/14

Channel: Chad Higdon-Topaz

Optimization with Calculus 1

Published: 2008/06/16

Channel: Khan Academy

1. Introduction and Optimization Problems

Published: 2017/05/19

Channel: MIT OpenCourseWare

(ML 15.1) Newton's method (for optimization) - intuition

Published: 2011/07/12

Channel: mathematicalmonk

Mathematical Optimization with MATLAB

Published: 2014/05/06

Channel: APMonitor.com

Optimization Calculus 1 - 2 Problems

Published: 2014/11/04

Channel: Calcworkshop.com - Calculus Videos

Constrained optimization introduction

Published: 2016/11/15

Channel: Khan Academy

DOE CSGF 2016: JuMP -- A Modeling Language for Mathematical Optimization

Published: 2016/08/23

Channel: Krell Institute

Tutorial: Introduction to Optimization

Published: 2016/08/18

Channel: Center for Brains, Minds and Machines (CBMM)

2. Optimization Problems

Published: 2017/05/19

Channel: MIT OpenCourseWare

Optimization Calculus - Fence Problems, Cylinder, Volume of Box, Minimum Distance & Norman Window

Published: 2016/11/19

Channel: The Organic Chemistry Tutor

Logical Conditions in Mathematical Optimization

Published: 2017/04/13

Channel: APMonitor.com

Mathematical Optimization with Python

Published: 2014/05/06

Channel: APMonitor.com

Mathematical optimization model that helps with decision-making in uncertain situations

Published: 2012/02/15

Channel: Keio University/ 慶應義塾

Lec 21 | MIT 18.086 Mathematical Methods for Engineers II

Published: 2008/05/19

Channel: MIT OpenCourseWare

Mathematical Optimization with MATLAB Optimization Toolbox (2)

Published: 2016/11/17

Channel: Mansour Alramlawi

General Mathematical Optimization

Published: 2012/10/19

Channel: Sanjeev Sharma

Intro - The Math of Intelligence

Published: 2017/06/16

Channel: Siraj Raval

Optimization for Machine Learning I

Published: 2017/01/23

Channel: Simons Institute

Optimization Problems: Applications to Economics

Published: 2010/01/06

Channel: Brightstorm

Optimization I

Published: 2013/09/10

Channel: Simons Institute

Intro to Mathematical Hotel Revenue Optimization Webinar

Published: 2013/12/10

Channel: Robert Hernandez

Mod-01 Lec-39 Multi Objective Decision Making

Published: 2014/06/11

Channel: nptelhrd

Solving mathematical optimization problems

Published: 2011/12/27

Channel: APMonitor.com

Optimization Example 4

Published: 2008/06/26

Channel: Khan Academy

Intro to Mathematical Hotel Revenue Optimization Webinar

Published: 2013/12/28

Channel: Robert Hernandez

LPP using [SIMPLEX METHOD ] simple logic with solved problem in Operations Research :-by kauserwise

Published: 2015/12/05

Channel: Kauser Wise

Convex Optimization and Applications - Stephen Boyd

Published: 2015/08/28

Channel: Calit2ube

IBM Advanced Analytics and Mathematical Optimization 2-Minute Explainer Video

Published: 2016/06/02

Channel: Business Information Graphics

Interior Point Method for Optimization

Published: 2016/03/14

Channel: APMonitor.com

Optimizing Functions of Two Variables

Published: 2013/06/20

Channel: Lorenzo Sadun

What is Optimization? + Learning Gradient Descent | Two Minute Papers #82

Published: 2016/07/29

Channel: Two Minute Papers

Mathematical Optimization and Python by likr

Published: 2013/09/15

Channel: PyConJP

Mathematical Optimization with MATLAB Optimization Toolbox (1)

Published: 2016/11/18

Channel: Mansour Alramlawi

Linear Programming Tutorial

Published: 2012/10/14

Channel: Randy Thomas

2013 University of Waterloo 3MT finalist: David Qian

Published: 2013/04/25

Channel: uwaterloo

Optimization: The Mathematical Toast

Published: 2012/12/14

Channel: Tinlr

Mod-01 Lec-21 Optimization- Basic ideas

Published: 2011/11/24

Channel: nptelhrd

Mod-01 Lec-33 Introduction to multi-variable optimization

Published: 2011/11/24

Channel: nptelhrd

Optimization Calculus Problems Minimizing Lengths READ DESCRIPTION

Published: 2013/09/01

Channel: ProfRobBob

OPTIMIZATION TECHNIQUE IN PHARMACEUTICAL FORMULATION AND PROCESS Dr K N Gujar

Published: 2013/10/07

Channel: KISHORE GUJAR

Mathematical modeling of fuel cells - an optimization tool

Published: 2017/02/08

Channel: Andrews University

Optimization Methods for Business Analytics | MITx on edX | Course About Video

Published: 2016/07/15

Channel: edX

EXAMPLE: Solving a mathematical optimisation problem using slack variables

Published: 2013/04/21

Channel: Maths Learning Centre UofA

Trends in Large-scale Nonconvex Optimization

Published: 2017/10/05

Channel: Simons Institute

In mathematics, computer science and operations research, **mathematical optimization** or **mathematical programming**, alternatively spelled *optimisation*, is the selection of a best element (with regard to some criterion) from some set of available alternatives.^{[1]}

In the simplest case, an optimization problem consists of maximizing or minimizing a real function by systematically choosing input values from within an allowed set and computing the value of the function. The generalization of optimization theory and techniques to other formulations constitutes a large area of applied mathematics. More generally, optimization includes finding "best available" values of some objective function given a defined domain (or input), including a variety of different types of objective functions and different types of domains.

An optimization problem can be represented in the following way:

*Given:*a function*f*:*A***R**from some set*A*to the real numbers*Sought:*an element*x*_{0}in*A*such that*f*(*x*_{0}) ≤*f*(*x*) for all*x*in*A*("minimization") or such that*f*(*x*_{0}) ≥*f*(*x*) for all*x*in*A*("maximization").

Such a formulation is called an **optimization problem** or a **mathematical programming problem** (a term not directly related to computer programming, but still in use for example in linear programming – see History below). Many real-world and theoretical problems may be modeled in this general framework. Problems formulated using this technique in the fields of physics and computer vision may refer to the technique as **energy minimization**, speaking of the value of the function *f* as representing the energy of the system being modeled.

Typically, *A* is some subset of the Euclidean space **R**^{n}, often specified by a set of *constraints*, equalities or inequalities that the members of *A* have to satisfy. The domain *A* of *f* is called the *search space* or the *choice set*, while the elements of *A* are called *candidate solutions* or *feasible solutions*.

The function *f* is called, variously, an **objective function**, a **loss function** or **cost function** (minimization),^{[2]} a **utility function** or **fitness function** (maximization), or, in certain fields, an **energy function** or **energy functional**. A feasible solution that minimizes (or maximizes, if that is the goal) the objective function is called an *optimal solution*.

In mathematics, conventional optimization problems are usually stated in terms of minimization. Generally, unless both the objective function and the feasible region are convex in a minimization problem, there may be several local minima. A *local minimum* **x*** is defined as a point for which there exists some δ > 0 such that for all **x** where

the expression

holds; that is to say, on some region around **x*** all of the function values are greater than or equal to the value at that point. Local maxima are defined similarly.

While a local minimum is at least as good as any nearby points, a global minimum is at least as good as every feasible point. In a convex problem, if there is a local minimum that is interior (not on the edge of the set of feasible points), it is also the global minimum, but a nonconvex problem may have more than one local minimum not all of which need be global minima.

A large number of algorithms proposed for solving nonconvex problems—including the majority of commercially available solvers—are not capable of making a distinction between locally optimal solutions and globally optimal solutions, and will treat the former as actual solutions to the original problem. Global optimization is the branch of applied mathematics and numerical analysis that is concerned with the development of deterministic algorithms that are capable of guaranteeing convergence in finite time to the actual optimal solution of a nonconvex problem.

Optimization problems are often expressed with special notation. Here are some examples.

Consider the following notation:

This denotes the minimum value of the objective function , when choosing *x* from the set of real numbers . The minimum value in this case is , occurring at .

Similarly, the notation

asks for the maximum value of the objective function 2*x*, where *x* may be any real number. In this case, there is no such maximum as the objective function is unbounded, so the answer is "infinity" or "undefined".

Consider the following notation:

or equivalently

This represents the value (or values) of the argument *x* in the interval that minimizes (or minimize) the objective function *x*^{2} + 1 (the actual minimum value of that function is not what the problem asks for). In this case, the answer is *x* = –1, since *x* = 0 is infeasible, i.e. does not belong to the feasible set.

Similarly,

or equivalently

represents the pair (or pairs) that maximizes (or maximize) the value of the objective function , with the added constraint that *x* lie in the interval (again, the actual maximum value of the expression does not matter). In this case, the solutions are the pairs of the form (5, 2kπ) and (−5,(2k+1)π), where *k* ranges over all integers.

**arg min** and **arg max** are sometimes also written **argmin** and **argmax**, and stand for **argument of the minimum** and **argument of the maximum**.

Fermat and Lagrange found calculus-based formulae for identifying optima, while Newton and Gauss proposed iterative methods for moving towards an optimum.

The term "linear programming" for certain optimization cases was due to George B. Dantzig, although much of the theory had been introduced by Leonid Kantorovich in 1939. (*Programming* in this context does not refer to computer programming, but from the use of *program* by the United States military to refer to proposed training and logistics schedules, which were the problems Dantzig studied at that time.) Dantzig published the Simplex algorithm in 1947, and John von Neumann developed the theory of duality in the same year.

Other major researchers in mathematical optimization include the following:

- Aharon Ben-Tal
- Richard Bellman
- Roger Fletcher
- Ronald A. Howard
- Fritz John
- Narendra Karmarkar
- William Karush
- Leonid Khachiyan
- Bernard Koopman
- Harold Kuhn
- László Lovász
- Arkadi Nemirovski
- Yurii Nesterov
- Boris Polyak
- Lev Pontryagin
- James Renegar
- R. Tyrrell Rockafellar
- Cornelis Roos
- Naum Z. Shor
- Michael J. Todd
- Albert Tucker

- Convex programming studies the case when the objective function is convex (minimization) or concave (maximization) and the constraint set is convex. This can be viewed as a particular case of nonlinear programming or as generalization of linear or convex quadratic programming.
- Linear programming (LP), a type of convex programming, studies the case in which the objective function
*f*is linear and the constraints are specified using only linear equalities and inequalities. Such a set is called a polyhedron or a polytope if it is bounded. - Second order cone programming (SOCP) is a convex program, and includes certain types of quadratic programs.
- Semidefinite programming (SDP) is a subfield of convex optimization where the underlying variables are semidefinite matrices. It is a generalization of linear and convex quadratic programming.
- Conic programming is a general form of convex programming. LP, SOCP and SDP can all be viewed as conic programs with the appropriate type of cone.
- Geometric programming is a technique whereby objective and inequality constraints expressed as posynomials and equality constraints as monomials can be transformed into a convex program.

- Linear programming (LP), a type of convex programming, studies the case in which the objective function
- Integer programming studies linear programs in which some or all variables are constrained to take on integer values. This is not convex, and in general much more difficult than regular linear programming.
- Quadratic programming allows the objective function to have quadratic terms, while the feasible set must be specified with linear equalities and inequalities. For specific forms of the quadratic term, this is a type of convex programming.
- Fractional programming studies optimization of ratios of two nonlinear functions. The special class of concave fractional programs can be transformed to a convex optimization problem.
- Nonlinear programming studies the general case in which the objective function or the constraints or both contain nonlinear parts. This may or may not be a convex program. In general, whether the program is convex affects the difficulty of solving it.
- Stochastic programming studies the case in which some of the constraints or parameters depend on random variables.
- Robust programming is, like stochastic programming, an attempt to capture uncertainty in the data underlying the optimization problem. Robust optimization targets to find solutions that are valid under all possible realizations of the uncertainties.
- Combinatorial optimization is concerned with problems where the set of feasible solutions is discrete or can be reduced to a discrete one.
- Stochastic optimization is used with random (noisy) function measurements or random inputs in the search process.
- Infinite-dimensional optimization studies the case when the set of feasible solutions is a subset of an infinite-dimensional space, such as a space of functions.
- Heuristics and metaheuristics make few or no assumptions about the problem being optimized. Usually, heuristics do not guarantee that any optimal solution need be found. On the other hand, heuristics are used to find approximate solutions for many complicated optimization problems.
- Constraint satisfaction studies the case in which the objective function
*f*is constant (this is used in artificial intelligence, particularly in automated reasoning).- Constraint programming is a programming paradigm wherein relations between variables are stated in the form of constraints.

- Disjunctive programming is used where at least one constraint must be satisfied but not all. It is of particular use in scheduling.
- Space mapping is a concept for modeling and optimization of an engineering system to high-fidelity (fine) model accuracy exploiting a suitable physically meaningful coarse or surrogate model.

In a number of subfields, the techniques are designed primarily for optimization in dynamic contexts (that is, decision making over time):

- Calculus of variations seeks to optimize an action integral over some space to an extremum by varying a function of the coordinates.
- Optimal control theory is a generalization of the calculus of variations which introduces control policies.
- Dynamic programming studies the case in which the optimization strategy is based on splitting the problem into smaller subproblems. The equation that describes the relationship between these subproblems is called the Bellman equation.
- Mathematical programming with equilibrium constraints is where the constraints include variational inequalities or complementarities.

Adding more than one objective to an optimization problem adds complexity. For example, to optimize a structural design, one would desire a design that is both light and rigid. When two objectives conflict, a trade-off must be created. There may be one lightest design, one stiffest design, and an infinite number of designs that are some compromise of weight and rigidity. The set of trade-off designs that cannot be improved upon according to one criterion without hurting another criterion is known as the Pareto set. The curve created plotting weight against stiffness of the best designs is known as the Pareto frontier.

A design is judged to be "Pareto optimal" (equivalently, "Pareto efficient" or in the Pareto set) if it is not dominated by any other design: If it is worse than another design in some respects and no better in any respect, then it is dominated and is not Pareto optimal.

The choice among "Pareto optimal" solutions to determine the "favorite solution" is delegated to the decision maker. In other words, defining the problem as multi-objective optimization signals that some information is missing: desirable objectives are given but combinations of them are not rated relative to each other. In some cases, the missing information can be derived by interactive sessions with the decision maker.

Multi-objective optimization problems have been generalized further into vector optimization problems where the (partial) ordering is no longer given by the Pareto ordering.

Optimization problems are often multi-modal; that is, they possess multiple good solutions. They could all be globally good (same cost function value) or there could be a mix of globally good and locally good solutions. Obtaining all (or at least some of) the multiple solutions is the goal of a multi-modal optimizer.

Classical optimization techniques due to their iterative approach do not perform satisfactorily when they are used to obtain multiple solutions, since it is not guaranteed that different solutions will be obtained even with different starting points in multiple runs of the algorithm. Evolutionary algorithms, however, are a very popular approach to obtain multiple solutions in a multi-modal optimization task.

The **satisfiability problem**, also called the **feasibility problem**, is just the problem of finding any feasible solution at all without regard to objective value. This can be regarded as the special case of mathematical optimization where the objective value is the same for every solution, and thus any solution is optimal.

Many optimization algorithms need to start from a feasible point. One way to obtain such a point is to relax the feasibility conditions using a slack variable; with enough slack, any starting point is feasible. Then, minimize that slack variable until slack is null or negative.

The extreme value theorem of Karl Weierstrass states that a continuous real-valued function on a compact set attains its maximum and minimum value. More generally, a lower semi-continuous function on a compact set attains its minimum; an upper semi-continuous function on a compact set attains its maximum.

One of Fermat's theorems states that optima of unconstrained problems are found at stationary points, where the first derivative or the gradient of the objective function is zero (see first derivative test). More generally, they may be found at critical points, where the first derivative or gradient of the objective function is zero or is undefined, or on the boundary of the choice set. An equation (or set of equations) stating that the first derivative(s) equal(s) zero at an interior optimum is called a 'first-order condition' or a set of first-order conditions.

Optima of equality-constrained problems can be found by the Lagrange multiplier method. The optima of problems with equality and/or inequality constraints can be found using the 'Karush–Kuhn–Tucker conditions'.

While the first derivative test identifies points that might be extrema, this test does not distinguish a point that is a minimum from one that is a maximum or one that is neither. When the objective function is twice differentiable, these cases can be distinguished by checking the second derivative or the matrix of second derivatives (called the Hessian matrix) in unconstrained problems, or the matrix of second derivatives of the objective function and the constraints called the bordered Hessian in constrained problems. The conditions that distinguish maxima, or minima, from other stationary points are called 'second-order conditions' (see 'Second derivative test'). If a candidate solution satisfies the first-order conditions, then satisfaction of the second-order conditions as well is sufficient to establish at least local optimality.

The envelope theorem describes how the value of an optimal solution changes when an underlying parameter changes. The process of computing this change is called comparative statics.

The maximum theorem of Claude Berge (1963) describes the continuity of an optimal solution as a function of underlying parameters.

For unconstrained problems with twice-differentiable functions, some critical points can be found by finding the points where the gradient of the objective function is zero (that is, the stationary points). More generally, a zero subgradient certifies that a local minimum has been found for minimization problems with convex functions and other locally Lipschitz functions.

Further, critical points can be classified using the definiteness of the Hessian matrix: If the Hessian is *positive* definite at a critical point, then the point is a local minimum; if the Hessian matrix is negative definite, then the point is a local maximum; finally, if indefinite, then the point is some kind of saddle point.

Constrained problems can often be transformed into unconstrained problems with the help of Lagrange multipliers. Lagrangian relaxation can also provide approximate solutions to difficult constrained problems.

When the objective function is convex, then any local minimum will also be a global minimum. There exist efficient numerical techniques for minimizing convex functions, such as interior-point methods.

To solve problems, researchers may use algorithms that terminate in a finite number of steps, or iterative methods that converge to a solution (on some specified class of problems), or heuristics that may provide approximate solutions to some problems (although their iterates need not converge).

- Simplex algorithm of George Dantzig, designed for linear programming.
- Extensions of the simplex algorithm, designed for quadratic programming and for linear-fractional programming.
- Variants of the simplex algorithm that are especially suited for network optimization.
- Combinatorial algorithms

The iterative methods used to solve problems of nonlinear programming differ according to whether they evaluate Hessians, gradients, or only function values. While evaluating Hessians (H) and gradients (G) improves the rate of convergence, for functions for which these quantities exist and vary sufficiently smoothly, such evaluations increase the computational complexity (or computational cost) of each iteration. In some cases, the computational complexity may be excessively high.

One major criterion for optimizers is just the number of required function evaluations as this often is already a large computational effort, usually much more effort than within the optimizer itself, which mainly has to operate over the N variables. The derivatives provide detailed information for such optimizers, but are even harder to calculate, e.g. approximating the gradient takes at least N+1 function evaluations. For approximations of the 2nd derivatives (collected in the Hessian matrix) the number of function evaluations is in the order of N². Newton's method requires the 2nd order derivates, so for each iteration the number of function calls is in the order of N², but for a simpler pure gradient optimizer it is only N. However, gradient optimizers need usually more iterations than Newton's algorithm. Which one is best with respect to the number of function calls depends on the problem itself.

- Methods that evaluate Hessians (or approximate Hessians, using finite differences):
- Newton's method
- Sequential quadratic programming: A Newton-based method for small-medium scale
*constrained*problems. Some versions can handle large-dimensional problems. - Interior point methods: This is a large class of methods for constrained optimization. Some interior-point methods use only (sub)gradient information, and others of which require the evaluation of Hessians.

- Methods that evaluate gradients, or approximate gradients in some way (or even subgradients):
- Coordinate descent methods: Algorithms which update a single coordinate in each iteration
- Conjugate gradient methods: Iterative methods for large problems. (In theory, these methods terminate in a finite number of steps with quadratic objective functions, but this finite termination is not observed in practice on finite–precision computers.)
- Gradient descent (alternatively, "steepest descent" or "steepest ascent"): A (slow) method of historical and theoretical interest, which has had renewed interest for finding approximate solutions of enormous problems.
- Subgradient methods - An iterative method for large locally Lipschitz functions using generalized gradients. Following Boris T. Polyak, subgradient–projection methods are similar to conjugate–gradient methods.
- Bundle method of descent: An iterative method for small–medium-sized problems with locally Lipschitz functions, particularly for convex minimization problems. (Similar to conjugate gradient methods)
- Ellipsoid method: An iterative method for small problems with quasiconvex objective functions and of great theoretical interest, particularly in establishing the polynomial time complexity of some combinatorial optimization problems. It has similarities with Quasi-Newton methods.
- Reduced gradient method (Frank–Wolfe) for approximate minimization of specially structured problems with linear constraints, especially with traffic networks. For general unconstrained problems, this method reduces to the gradient method, which is regarded as obsolete (for almost all problems).
- Quasi-Newton methods: Iterative methods for medium-large problems (e.g. N<1000).
- Simultaneous perturbation stochastic approximation (SPSA) method for stochastic optimization; uses random (efficient) gradient approximation.

- Methods that evaluate only function values: If a problem is continuously differentiable, then gradients can be approximated using finite differences, in which case a gradient-based method can be used.
- Interpolation methods
- Pattern search methods, which have better convergence properties than the Nelder–Mead heuristic (with simplices), which is listed below.

More generally, if the objective function is not a quadratic function, then many optimization methods use other methods to ensure that some subsequence of iterations converges to an optimal solution. The first and still popular method for ensuring convergence relies on line searches, which optimize a function along one dimension. A second and increasingly popular method for ensuring convergence uses trust regions. Both line searches and trust regions are used in modern methods of non-differentiable optimization. Usually a global optimizer is much slower than advanced local optimizers (such as BFGS), so often an efficient global optimizer can be constructed by starting the local optimizer from different starting points.

Besides (finitely terminating) algorithms and (convergent) iterative methods, there are heuristics. A heuristic is any algorithm which is not guaranteed (mathematically) to find the solution, but which is nevertheless useful in certain practical situations. List of some well-known heuristics:

- Memetic algorithm
- Differential evolution
- Evolutionary algorithms
- Dynamic relaxation
- Genetic algorithms
- Hill climbing with random restart
- Nelder-Mead simplicial heuristic: A popular heuristic for approximate minimization (without calling gradients)
- Particle swarm optimization
- Gravitational search algorithm
- Artificial bee colony optimization
- Simulated annealing
- Stochastic tunneling
- Tabu search
- Reactive Search Optimization (RSO)
^{[3]}implemented in LIONsolver

Problems in rigid body dynamics (in particular articulated rigid body dynamics) often require mathematical programming techniques, since you can view rigid body dynamics as attempting to solve an ordinary differential equation on a constraint manifold; the constraints are various nonlinear geometric constraints such as "these two points must always coincide", "this surface must not penetrate any other", or "this point must always lie somewhere on this curve". Also, the problem of computing contact forces can be done by solving a linear complementarity problem, which can also be viewed as a QP (quadratic programming) problem.

Many design problems can also be expressed as optimization programs. This application is called design optimization. One subset is the engineering optimization, and another recent and growing subset of this field is multidisciplinary design optimization, which, while useful in many problems, has in particular been applied to aerospace engineering problems.

This approach may be applied in cosmology and astrophysics,.^{[4]}

Economics is closely enough linked to optimization of agents that an influential definition relatedly describes economics *qua* science as the "study of human behavior as a relationship between ends and scarce means" with alternative uses.^{[5]} Modern optimization theory includes traditional optimization theory but also overlaps with game theory and the study of economic equilibria. The *Journal of Economic Literature* codes classify mathematical programming, optimization techniques, and related topics under JEL:C61-C63.

In microeconomics, the utility maximization problem and its dual problem, the expenditure minimization problem, are economic optimization problems. Insofar as they behave consistently, consumers are assumed to maximize their utility, while firms are usually assumed to maximize their profit. Also, agents are often modeled as being risk-averse, thereby preferring to avoid risk. Asset prices are also modeled using optimization theory, though the underlying mathematics relies on optimizing stochastic processes rather than on static optimization. International trade theory also uses optimization to explain trade patterns between nations. The optimization of market portfolios is an example of multi-objective optimization in economics.

Since the 1970s, economists have modeled dynamic decisions over time using control theory. For example, microeconomists use dynamic search models to study labor-market behavior.^{[6]} A crucial distinction is between deterministic and stochastic models.^{[7]} Macroeconomists build dynamic stochastic general equilibrium (DSGE) models that describe the dynamics of the whole economy as the result of the interdependent optimizing decisions of workers, consumers, investors, and governments.^{[8]}^{[9]}

Some common applications of optimization techniques in electrical engineering include active filter design,^{[10]} stray field reduction in superconducting magnetic energy storage systems, space mapping design of microwave structures,^{[11]} handset antennas,^{[12]}^{[13]}^{[14]} electromagnetics-based design. Electromagnetically validated design optimization of microwave components and antennas has made extensive use of an appropriate physics-based or empirical surrogate model and space mapping methodologies since the discovery of space mapping in 1993 ^{[15]}^{[16]}

Optimization has been widely used in civil engineering. The most common civil engineering problems that are solved by optimization are cut and fill of roads, life-cycle analysis of structures and infrastructures,^{[17]} resource leveling^{[18]} and schedule optimization.

Another field that uses optimization techniques extensively is operations research.^{[19]} Operations research also uses stochastic modeling and simulation to support improved decision-making. Increasingly, operations research uses stochastic programming to model dynamic decisions that adapt to events; such problems can be solved with large-scale optimization and stochastic optimization methods.

Mathematical optimization is used in much modern controller design. High-level controllers such as model predictive control (MPC) or real-time optimization (RTO) employ mathematical optimization. These algorithms run online and repeatedly determine values for decision variables, such as choke openings in a process plant, by iteratively solving a mathematical optimization problem including constraints and a model of the system to be controlled.

Optimization techniques are regularly used in geophysical parameter estimation problems. Given a set of geophysical measurements, e.g. seismic recordings, it is common to solve for the physical properties and geometrical shapes of the underlying rocks and fluids.

Nonlinear optimization methods are widely used in conformational analysis.

- Brachistochrone
- Curve fitting
- Deterministic global optimization
- Goal programming
- Important publications in optimization
- Least squares
- Mathematical Optimization Society (formerly Mathematical Programming Society)
- Mathematical optimization algorithms
- Mathematical optimization software
- Process optimization
- Simulation-based optimization
- Test functions for optimization
- Variational calculus

**^**"The Nature of Mathematical Programming Archived 2014-03-05 at the Wayback Machine.,"*Mathematical Programming Glossary*, INFORMS Computing Society.**^**W. Erwin Diewert (2008). "cost functions,"*The New Palgrave Dictionary of Economics*, 2nd Edition Contents.**^**Battiti, Roberto; Mauro Brunato; Franco Mascia (2008).*Reactive Search and Intelligent Optimization*. Springer Verlag. ISBN 978-0-387-09623-0. Archived from the original on 2012-03-16.**^**Haggag, S.; Desokey, F.; Ramadan, M., (2017). "A cosmological inflationary model using optimal control".*Gravitation and Cosmology*. Pleiades Publishing.**23**(3): 236–239. ISSN 1995-0721. doi:10.1134/S0202289317030069.**^**Lionel Robbins (1935, 2nd ed.)*An Essay on the Nature and Significance of Economic Science*, Macmillan, p. 16.**^**A. K. Dixit ([1976] 1990).*Optimization in Economic Theory*, 2nd ed., Oxford. Description and contents preview.**^**A.G. Malliaris (2008). "stochastic optimal control,"*The New Palgrave Dictionary of Economics*, 2nd Edition. Abstract.**^**Julio Rotemberg and Michael Woodford (1997), "An Optimization-based Econometric Framework for the Evaluation of Monetary Policy.*NBER Macroeconomics Annual*, 12, pp. 297-346.**^**From*The New Palgrave Dictionary of Economics*(2008), 2nd Edition with Abstract links:

• "numerical optimization methods in economics" by Karl Schmedders

• "convex programming" by Lawrence E. Blume

• "Arrow–Debreu model of general equilibrium" by John Geanakoplos.**^**De, Bishnu Prasad; Kar, R.; Mandal, D.; Ghoshal, S. P. (2014-09-27). "Optimal selection of components value for analog active filter design using simplex particle swarm optimization".*International Journal of Machine Learning and Cybernetics*.**6**(4): 621–636. ISSN 1868-8071. doi:10.1007/s13042-014-0299-0.**^**S. Koziel and J.W. Bandler, "Space mapping with multiple coarse models for optimization of microwave components," IEEE Microwave and Wireless Components Letters, vol. 8, no. 1, pp. 1–3, Jan. 2008.**^**S. Tu, Q.S. Cheng, Y. Zhang, J.W. Bandler, and N.K. Nikolova, “Space mapping optimization of handset antennas exploiting thin-wire models,” IEEE Trans. Antennas Propag., vol. 61, no. 7, pp. 3797-3807, July 2013.]**^**N. Friedrich, “Space mapping outpaces EM optimization in handset-antenna design,” microwaves&rf, Aug. 30, 2013.**^**Juan C. Cervantes-González, J. E. Rayas-Sánchez, C. A. López, J. R. Camacho-Pérez, Z. Brito-Brito, and J. L. Chavez-Hurtado,“Space mapping optimization of handset antennas considering EM effects of mobile phone components and human body,” Int. J. RF and Microwave CAE, vol. 26, no. 2, pp. 121-128, Feb. 2016**^**J.W. Bandler, R.M. Biernacki, S.H. Chen, P.A. Grobelny, and R.H. Hemmers, “Space mapping technique for electromagnetic optimization,” IEEE Trans. Microwave Theory Tech., vol. 42, no. 12, pp. 2536-2544, Dec. 1994.**^**J.W. Bandler, R.M. Biernacki, S.H. Chen, R.H. Hemmers, and K. Madsen,“Electromagnetic optimization exploiting aggressive space mapping,” IEEE Trans. Microwave Theory Tech., vol. 43, no. 12, pp. 2874-2882, Dec. 1995.**^**Piryonesi, S. M., & Tavakolan, M. (2017). A mathematical programming model for solving cost-safety optimization (CSO) problems in the maintenance of structures. KSCE Journal of Civil Engineering, 1-10.**^**Hegazy, T., (1999) Optimization of Resource Allocation and Leveling Using Genetic Algorithms, Journal of Construction Engineering and Management, ASCE, Vol. 125, No. 3, pp 167-175.**^**"New force on the political scene: the Seophonisten". http://www.seophonist-wahl.de. Archived from the original on 18 December 2014. Retrieved 14 September 2013. External link in`|publisher=`

(help)

- Bradley, S.; Hax, A.; Magnanti, T. (1977).
*Applied mathematical programming*. Addison Wesley. - Parkinson, A.; Balling, R.; Hedengren, J. (2013).
*Optimization Methods for Engineering Design*. Provo, UT: Brigham Young University. - Rardin, Ronald L. (1997).
*Optimization in operations research*. Prentice Hall. p. 919. ISBN 0-02-398415-5.copyright: 1998

- Strang, Gilbert (1986).
*Introduction to applied mathematics*. Wellesley, MA: Wellesley-Cambridge Press (Strang's publishing company). pp. xii+758. ISBN 0-9614088-0-4. MR 870634.

- Magnanti, Thomas L. (1989). "Twenty years of mathematical programming". In Cornet, Bernard; Tulkens, Henry.
*Contributions to Operations Research and Economics: The twentieth anniversary of CORE (Papers from the symposium held in Louvain-la-Neuve, January 1987)*. Cambridge, MA: MIT Press. pp. 163–227. ISBN 0-262-03149-3. MR 1104662. - Minoux, M. (1986).
*Mathematical programming: Theory and algorithms*. Egon Balas foreword) (Translated by Steven Vajda from the (1983 Paris: Dunod) French ed.). Chichester: A Wiley-Interscience Publication. John Wiley & Sons, Ltd. pp. xxviii+489. ISBN 0-471-90170-9. MR 2571910. (2008 Second ed., in French:*Programmation mathématique: Théorie et algorithmes*. Editions Tec & Doc, Paris, 2008. xxx+711 pp. ISBN 978-2-7430-1000-3. MR868279. - Nemhauser, G. L.; Rinnooy Kan, A. H. G.; Todd, M. J., eds. (1989).
*Optimization*. Handbooks in Operations Research and Management Science.**1**. Amsterdam: North-Holland Publishing Co. pp. xiv+709. ISBN 0-444-87284-1. MR 1105099.- J. E. Dennis, Jr. and Robert B. Schnabel, A view of unconstrained optimization (pp. 1–72);
- Donald Goldfarb and Michael J. Todd, Linear programming (pp. 73–170);
- Philip E. Gill, Walter Murray, Michael A. Saunders, and Margaret H. Wright, Constrained nonlinear programming (pp. 171–210);
- Ravindra K. Ahuja, Thomas L. Magnanti, and James B. Orlin, Network flows (pp. 211–369);
- W. R. Pulleyblank, Polyhedral combinatorics (pp. 371–446);
- George L. Nemhauser and Laurence A. Wolsey, Integer programming (pp. 447–527);
- Claude Lemaréchal, Nondifferentiable optimization (pp. 529–572);
- Roger J-B Wets, Stochastic programming (pp. 573–629);
- A. H. G. Rinnooy Kan and G. T. Timmer, Global optimization (pp. 631–662);
- P. L. Yu, Multiple criteria decision making: five basic concepts (pp. 663–699).

- Shapiro, Jeremy F. (1979).
*Mathematical programming: Structures and algorithms*. New York: Wiley-Interscience [John Wiley & Sons]. pp. xvi+388. ISBN 0-471-77886-9. MR 544669. - Spall, J. C. (2003),
*Introduction to Stochastic Search and Optimization: Estimation, Simulation, and Control*, Wiley, Hoboken, NJ. - University, Edwin K. P. Chong, Colorado State University, Stanislaw H. Żak, Purdue (2013).
*An introduction to optimization*(Fourth edition. ed.). Hoboken, New Jersey: John Wiley & Sons. ISBN 9781118279014.

- Roger Fletcher (2000).
*Practical methods of optimization*. Wiley. ISBN 978-0-471-49463-8. - Mordecai Avriel (2003).
*Nonlinear Programming: Analysis and Methods*. Dover Publishing. ISBN 0-486-43227-0. - P. E. Gill, W. Murray and M. H. Wright (1982).
*Practical Optimization*. Emerald Publishing. ISBN 978-0-12-283952-8. - Xin-She Yang (2010).
*Engineering Optimization: An Introduction with Metaheuristic Applications*. Wiley. ISBN 978-0-470-58246-6. - Bonnans, J. Frédéric; Gilbert, J. Charles; Lemaréchal, Claude; Sagastizábal, Claudia A. (2006).
*Numerical optimization: Theoretical and practical aspects*. Universitext (Second revised ed. of translation of 1997 French ed.). Berlin: Springer-Verlag. pp. xiv+490. ISBN 3-540-35445-X. MR 2265882. doi:10.1007/978-3-540-35447-5. - Bonnans, J. Frédéric; Shapiro, Alexander (2000).
*Perturbation analysis of optimization problems*. Springer Series in Operations Research. New York: Springer-Verlag. pp. xviii+601. ISBN 0-387-98705-3. MR 1756264. - Boyd, Stephen P.; Vandenberghe, Lieven (2004).
*Convex Optimization*(pdf). Cambridge University Press. ISBN 978-0-521-83378-3. Retrieved October 15, 2011. - Jorge Nocedal and Stephen J. Wright (2006).
*Numerical Optimization*. Springer. ISBN 0-387-30303-0. - Ruszczyński, Andrzej (2006).
*Nonlinear Optimization*. Princeton, NJ: Princeton University Press. pp. xii+454. ISBN 978-0-691-11915-1. MR 2199043. - Robert J. Vanderbei (2013).
*Linear Programming: Foundations and Extensions, 4th Edition*. Springer. ISBN 978-1-4614-7629-0.

- R. K. Ahuja, Thomas L. Magnanti, and James B. Orlin (1993).
*Network Flows: Theory, Algorithms, and Applications*. Prentice-Hall, Inc. ISBN 0-13-617549-X. - William J. Cook, William H. Cunningham, William R. Pulleyblank, Alexander Schrijver;
*Combinatorial Optimization*; John Wiley & Sons; 1 edition (November 12, 1997); ISBN 0-471-55894-X. - Gondran, Michel; Minoux, Michel (1984).
*Graphs and algorithms*. Wiley-Interscience Series in Discrete Mathematics (Translated by Steven Vajda from the second (*Collection de la Direction des Études et Recherches d'Électricité de France*[Collection of the Department of Studies and Research of Électricité de France], v. 37. Paris: Éditions Eyrolles 1985. xxviii+545 pp. MR868083) French ed.). Chichester: John Wiley & Sons, Ltd. pp. xix+650. ISBN 978-2-7430-1035-5. MR 2552933. (Fourth ed. Collection EDF R&D. Paris: Editions Tec & Doc 2009. xxxii+784 pp. MR745802. - Eugene Lawler (2001).
*Combinatorial Optimization: Networks and Matroids*. Dover. ISBN 0-486-41453-1. - Lawler, E. L.; Lenstra, J. K.; Rinnooy Kan, A. H. G.; Shmoys, D. B. (1985),
*The traveling salesman problem: A guided tour of combinatorial optimization*, John Wiley & Sons, ISBN 0-471-90413-9. - Jon Lee;
*A First Course in Combinatorial Optimization*; Cambridge University Press; 2004; ISBN 0-521-01012-8. - Christos H. Papadimitriou and Kenneth Steiglitz
*Combinatorial Optimization : Algorithms and Complexity*; Dover Pubns; (paperback, Unabridged edition, July 1998) ISBN 0-486-40258-4.

Methods to obtain suitable (in some sense) natural extensions of optimization problems that otherwise lack of existence or stability of solutions to obtain problems with guaranteed existence of solutions and their stability in some sense (typically under various perturbation of data) are in general called relaxation. Solutions of such extended (=relaxed) problems in some sense characterizes (at least certain features) of the original problems, e.g. as far as their optimizing sequences concerns. Relaxed problems may also possesses their own natural linear structure that may yield specific optimality conditions different from optimality conditions for the original problems.

- H. O. Fattorini: Infinite Dimensional Optimization and Control Theory. Cambridge Univ. Press, 1999.
- P. Pedregal: Parametrized Measures and Variational Principles. Birkhäuser, Basel, 1997
- T. Roubicek: "Relaxation in Optimization Theory and Variational Calculus". W. de Gruyter, Berlin, 1997. ISBN 3-11-014542-1.
- J. Warga: Optimal control of differential and functional equations. Academic Press, 1972.

*Computational Optimization and Applications*- Journal of Computational
*Optimization in Economics and Finance* *Journal of Economic Dynamics and Control**SIAM Journal on Optimization*(SIOPT) and Editorial Policy*SIAM Journal on Control and Optimization*(SICON) and Editorial Policy

- COIN-OR—Computational Infrastructure for Operations Research
- Decision Tree for Optimization Software Links to optimization source codes
- Global optimization
- Mathematical Programming Glossary
- Mathematical Programming Society
- NEOS Guide currently being replaced by the NEOS Wiki
^{[dead link]} - Optimization Online A repository for optimization e-prints
- Optimization Related Links
- Convex Optimization I EE364a: Course from Stanford University
- Convex Optimization – Boyd and Vandenberghe Book on Convex Optimization
- Book and Course on Optimization Methods for Engineering Design
- Mathematical Optimization in Operations Research from the Institute for Operations Research and the Management Sciences (INFORMS)

None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, Wikipedia, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.

All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.

The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.

Wikipedia content is licensed under the GFDL and (CC) license