# Pound-foot (torque)

VIDEOS 1 TO 50

GO TO RESULTS [1 .. 50]

### WIKIPEDIA ARTICLE

Pound-foot
Unit system British Gravitational System, English Engineering Units
Unit of Torque
Symbol lbf∙ft
Unit conversions
1 lbf∙ft in ...... is equal to ...
SI units    ≈ 1.355818 N⋅m[1]
Gravitational metric system    ≈ 0.1382550 kgf⋅m

A pound-foot (lbf⋅ft) is a unit of torque (a pseudovector). One pound-foot is the torque created by one pound of force acting at a perpendicular distance of one foot from a pivot point.[2] Conversely one pound-foot is the moment about an axis that applies one pound-force at a radius of one foot.

The value in SI units is given by multiplying the following approximate factors:

One pound (force) = 4.448 222 newtons[3][4]
One foot = 0.3048 m[5]

This gives the conversion factor:

One pound-foot = 1.35582 newton metres.

The name "pound-foot", intended to minimize confusion with the foot-pound as a unit of work, was apparently first proposed by British physicist Arthur Mason Worthington.[6] However, the torque unit is often still referred to as the foot-pound (ft⋅lbf).[7]

Similarly, an inch-pound (though should be more correctly as pound-inch) is the torque of one pound of force applied to one inch of distance from the pivot, and is equal to 1/12 of a pound-foot. It is commonly used on torque wrenches and torque screwdrivers for setting specific fastener tension.

## References

1. ^ "Appendix B.9: Factors for units listed by kind of quantity or field of science". NIST Guide to the SI. National Institute of Standards and Technology. September 7, 2016. Retrieved 2018-07-09.
2. ^ Pickerill, Ken (2009). Today's Technician: Automotive Engine Performance Classroom Manual and Shop Manual (5th ed.). Cengage Learning. pp. 50–51. ISBN 1111782385.
3. ^ United States National Bureau of Standards (1959-06-25). "Notices "Refinement of values for the yard and the pound"" (PDF). Retrieved 2006-08-12.
4. ^ Howard Ludwig (Mar 3, 2017). "What is the relation between pounds of force and pounds as a measurement of mass?".
5. ^ Collins, Joseph B. (2009), "OpenMath Context Dictionaries for SI Quantities and Units", in Carette, Jacques; Dixon, Lucas; Coen, Claudio Sacerdoti; Watt, Stephen, Procedings Intelligent Computer Mathematics: 16th Symposium, Calculemus 2009, 8th International Conference, MKM 2009, Grand Bend, Canada, July 6-12, 2009, 5625, Springer Science & Business Media, p. 260, ISBN 3642026141
6. ^ Arthur Mason Worthington (1900). Dynamics of rotation : an elementary introduction to rigid dynamics (3rd ed.). Longmans, Green, and Co. p. 9.
7. ^ Erjavec, Jack. Manual Transmissions & Transaxles: Classroom manual. p. 38. ISBN 978-1-4354-3933-7.

### Disclaimer

None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, Wikipedia, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.

All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.

The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.