Flinders Street railway station in 2009
|Transit type||Commuter rail|
|Number of lines||16|
|Number of stations||218|
|Annual ridership||236.8 million|
|Chief executive||Campbell Rose|
|Began operation||12 September 1854|
Metro Trains Melbourne|
|Character||At-grade with elevated and underground sections|
|Train length||6 cars (3 for shuttles)|
|Track gauge||1,600 mm (5 ft 3 in) Victorian broad gauge|
|Electrification||1500 V DC overhead (excluding Stony Point, which is not electrified)|
|Melbourne rail network|
|Clifton Hill group|
|List of stations|
The first steam train in Australia commenced service in Melbourne in 1854, with the network having grown over the last two centuries to consist of 218 stations across 16 lines, serving a yearly ridership of 236 million. Metro Trains Melbourne operates the Melbourne suburban railway network under franchise from the State Government of Victoria, whilst the government-owned entity V/Line operates trains from Melbourne across regional Victoria.
The suburban network is a commuter rail system designed to transport passengers from Melbourne's suburbs into the Central Business District (CBD) and associated city loop stations, with the main hub at Flinders Street station. An underground line is currently under construction as part of the Melbourne Metro Rail Project, which aims to unlock network capacity and provide Melbourne with a turn-up-and-go metro-like service.
A total length of 830 kilometres of track is owned by VicTrack and leased to train operators through Public Transport Victoria. The railway network is primarily at ground level, featuring more than 170 level crossings and smaller underground and elevated sections. The Level Crossing Removal Authority has been established to help remove the 50 busiest level crossings and ease associated road congestion. The suburban network operates primarily between 5:00 a.m. and midnight, with 24 hour services from Friday to Sunday. Some tracks are also used by freight trains and V/Line regional services.
In addition to the primary commuter and freight railway networks, Melbourne also features heritage railways such as Puffing Billy.
On 7 September 1851 a public meeting called for the construction of Australia's first railway to linking Melbourne and Sandridge (now known as Port Melbourne), which led to the establishment of the privately owned Melbourne and Hobson's Bay Railway Company in 1853.
On 8 February 1853 the Government also approved the establishment of the Geelong and Melbourne Railway Company and the Melbourne, Mount Alexander and Murray River Railway Company. Work began in March 1853 on the Sandridge railway line, stretching 4 kilometres (2.5 mi) from the Melbourne (or City) terminus (on the site of modern-day Flinders Street station) to Sandridge. The line was owned and operated by Melbourne and Hobson's Bay Railway Company, opening in 1854.
In 1855 the Government conducted enquiries and carried out surveys into country railways. On 1 April 1856, the Railway Department was established as part of the Board of Land and Works with George Christian Darbyshire being appointed Engineer in Chief. On 23 May of that year the Melbourne, Mount Alexander and Murray River Railway Company was taken over by the Government.
Trains were ordered from Robert Stephenson and Company of the United Kingdom. The first train was locally built by Robertson, Martin & Smith, however, owing to delays in shipping. Australia's first steam locomotive was built in ten weeks and cost £2,700. Forming the first steam train to travel in Australia, it made its maiden trip on 12 September 1854.
The opening of the line occurred during the period of the Victorian gold rush—a time when both Melbourne and Victoria undertook massive capital works, each with its own gala opening. The inaugural journey on the Sandridge line was no exception. According to the Argus newspaper's report of the next day: "Long before the hour appointed . . . a great crowd assembled round the station at the Melbourne terminus, lining the whole of Flinders Street". Lieutenant-Governor Sir Charles Hotham and Lady Hotham were aboard the train—which consisted of two first class carriages and one second class—and were presented with satin copies of the railway's timetable and bylaws.
The trip took 10 minutes, none of the later stations along the line having been built yet. On arriving at Station Pier (onto which the tracks extended), it was hailed with gun-salutes by the warships HMS Electra and HMS Fantome.
By March 1855, the four engines ordered from the UK were all in service, with trains running every half-hour. They were named Melbourne, Sandridge, Victoria, and Yarra (after the Yarra River over which the line crossed).
Melbourne's second railway line opened 13 May 1857, when the Melbourne and Hobson's Bay Railway Company opened their 4.5 km line from the Melbourne (or City) Terminus to St Kilda. This line was later extended by the St Kilda and Brighton Railway Company, which opened a line from St Kilda to Brighton in 1857.
Country lines were also built in 1857, with the Geelong and Melbourne Railway Company opening a line from Geelong to Newport. In 1859 the Williamstown railway line opened, connecting Williamstown and Geelong to Spencer Street station.
More country lines followed in 1859 when Victorian Railways opened a line from the Williamstown line at Footscray, to Sunbury, taking over from the Melbourne, Mount Alexander and Murray River Railway Company that was established in 1853 to build a railway to Echuca, but failed to make any progress.
The first line to Melbourne's south-eastern suburbs was opened in 1859 by the Melbourne and Suburban Railway Company, which ran from Princes Bridge railway station to Punt Road (Richmond), South Yarra, and Prahran. This line was extended to Windsor in 1860, connecting with the St Kilda and Brighton Railway Company line from St Kilda. The new line replaced the indirect St Kilda and Windsor line to the city, which was closed in 1867.
Another suburban line was built by the Melbourne and Essendon Railway Company in 1860, with their line running from North Melbourne to Essendon, with a branch line from Newmarket to Flemington Racecourse opening in 1861. On the eastern side of town, the Melbourne and Suburban Railway Company opened a branch line from Richmond to Burnley and Hawthorn in 1861.
By this point, the railways of Melbourne were a disjointed group of city-centric lines, with various companies operating from three disconnected city terminals—Princes Bridge, Flinders Street, and Spencer Street stations.
Some of the smaller companies were encountering financial problems. The St Kilda and Brighton Railway Company and Melbourne and Suburban Railway Company were absorbed by the Melbourne and Hobson's Bay Railway Company in 1865, forming the Melbourne and Hobsons Bay United Railway Company. The Melbourne and Essendon Railway Company was taken over by the Victorian Government in 1867. The Melbourne and Hobsons Bay United Railway Company was not taken over by the Victorian Government until 1878.
The terminals themselves were linked in 1879, when track was built along the southern side of Flinders Street at street level to connect with Spencer Street station, although this was only used for freight traffic at night. It was not until 1889 that the two track Flinders Street Viaduct was built between the two city terminus stations.
Outwards expansion also continued, with major trunk lines being opened into rural Victoria. Victorian Railways extended their line to Broadmeadows in 1872 as part of the line to Seymour and Albury-Wodonga. In 1879 the Gippsland line was opened from South Yarra to Caulfield, Pakenham and Bairnsdale.
The 1870s and 1880s were a time of great growth and prosperity in Melbourne. Land speculation companies were formed, to buy up outer suburban land cheaply, and to agitate for suburban railways to be built or extended to serve these land holdings and increase land values. By 1880 the "Land Boom" was in full swing in Victoria, with the passing of the Railway Construction Act 1884, later known as the Octopus Act for the 66 lines across the state that were authorised in it.
The Frankston line began with the opening of a line from Caulfield to Mordialloc in 1881, reaching the terminus in 1882. A second new suburban railway line was opened from Spencer Street Station to Coburg in 1884, and extended to Somerton in 1889, meeting the main line from Spencer Street to Wodonga. Land developers opened a private railway from Newport to Altona in 1888, but it was closed in 1890, due to lack of demand.
The line from Hawthorn was extended, to Camberwell in 1882, Lilydale in 1883, and Healesville in 1889. In addition, a branch line (now known as the Belgrave line) was opened from Ringwood to Upper Ferntree Gully in 1889. A short branch two station was also opened from Hawthorn to Kew in 1887. The Brighton Beach line was also extended to Sandringham in 1887.
In 1888, railways came to the north eastern suburbs with the opening of the Inner Circle line from Spencer Street station via Royal Park station to what is now Victoria Park station, and then on to Heidelberg. A branch was also opened off the Inner Circle in Fitzroy North, to Epping and Whittlesea in 1888 and 1889. Trains between Spencer Street and Heidelberg reversed at Victoria Park until a link was opened between Victoria Park and Princes Bridge in 1901.
The Outer Circle line opened in 1890, linking Oakleigh (on the Gippsland line) to Riversdale (with a branch to Camberwell on the Lilydale line) and Fairfield (on the Heidelberg line). Originally envisaged to link the Gippsland line with Spencer Street station in the 1870s, this reason disappeared with the building of a direct link via South Yarra before the line had even opened. The line saw little traffic as it traversed empty paddocks, and with no though traffic, the Outer Circle was closed in sections between 1893 and 1897. The Camberwell to Ashburton stretch of the Outer Circle re-opened in 1899, then in 1900, part of the northern section of the Outer Circle reopened as a shuttle service between East Camberwell and Deepdene station. This line closed in 1927.
At the same time as the Outer Circle, a railway was opened from Burnley to Darling and a junction with the Outer Circle at Waverley Road (near the modern East Malvern). A stub of the future Glen Waverley line, it was cut back to Darling in 1895.
The land boom railway building hit a peak with the construction of the Rosstown Railway between Elsternwick and Oakleigh. Built by William Murry Ross, the line was planned from the 1870s to serve a sugar beet mill near Caulfield. Construction commenced in 1883, followed by rebuilding in 1888. Ross's debt grew, and he attempted to sell the line many times without success. The line never opened to traffic and was later dismantled.
The stock market crash of 1891 lead to an extended period of economic depression, and put an end to railway construction until the next decade.
By the 1900s, the driving force for new railway lines were the farmers in what is now Melbourne's outer suburbs. In the Dandenong Ranges a narrow gauge 762 mm line was opened from Upper Ferntree Gully to Belgrave and Gembrook in 1900 to serve the local farming and timber community. In the Yarra Valley a branch was opened from Lilydale to Yarra Junction and Warburton in 1901. Part of this line is now listed on the Victorian Heritage Register.
The Heidelberg line was extended to Eltham in 1902 and Hurstbridge in 1912. The freight only Mont Park line was also opened in 1911, branching from Macleod. Finally on the Mornington Peninsula, a branch was built from Bittern to Red Hill in 1921.
Planning for electrification was started by Victorian Railways chairman Thomas James Tait, who engaged English engineer Charles Hesterman Merz to deliver a report on the electrification of the Melbourne suburban network. His first report in 1908 recommended a three-stage plan over 2 years, covering 200 route km of existing lines and almost 500 suburban carriages (approximately 80 trains). The report was considered by the Government and the Railway Commissioners, and Merz was engaged to deliver a second report based on their feedback.
Delivered in 1912, this second report recommended an expanded system of electrification to 240 route km. of existing lines (463 track km), and almost 800 suburban carriages (approximately 130 trains). The works were approved by the State Government in December 1912. It was envisaged that the first electric trains would be running by 1915, and the project would be completed by 1917. However, progress fell behind because World War I restrictions prevented electrical equipment being imported from the United Kingdom.
Rolling stock construction continued, with a number of older suburban carriages converted for electric use as the Swing Door trains, while the first of the Tait trains were introduced as steam hauled carriages. Track expansion was also carried out, with four tracks being provided between South Yarra and Caulfield, as well as grade separation from roads. Victorian Railways in 1918 opened the Newport power station, the largest power station in the urban area, to supply electricity as part of the electrification project. The State Electricity Commission of Victoria was formed in 1921 but did not take over Newport A power station until 1951.
The first trials did not occur until October 1918 on the Flemington Racecourse line. Driver training continued on this line until 18 May 1919, when the first electric train ran between Sandringham and Essendon, simulating revenue services. Electric services started on 28 May 1919 with the first train running to Essendon, then on to Sandringham, with full services started the next day. The Burnley–Darling line, the Fawkner line, the reopened branch to Altona, and the Williamstown line followed in 1920.
The line to Broadmeadows, the Whittlesea line to Reservoir, the Bendigo line to St Albans, and the inner sections of the Hurstbridge line were electrified in 1921. The Gippsland line to Dandenong and Frankston line were electrified in 1922, as was the inner section of the Ringwood line due to regrading works.
The original electrification scheme was completed in 1923, but over the next three years a number of short extensions were carried out. The Ashburton line was electrified in 1924, final works on the Lilydale line were completed in 1925, as was electrification on the line to Upper Ferntree Gully. Electrification on the outer ends of the Hurstbridge line were completed by 1926, the Whittlesea line to Thomastown was electrified in 1929, and the Burnley - Darling line was extended to Glen Waverley in 1930 to become the Glen Waverley line.
Railways experienced increased patronage into the 1940s, but railway improvements recommended in the Ashworth Improvement Plan were delayed until after World War II. It was not until 1950 that the Victorian Railways were able to put their Operation Phoenix rebuilding plan into action. The delivery of the Harris trains, the first steel suburban trains on the network, enabled the retirement of the oldest of the Swing Door trains.
Railway lines were extended during this period to encompass Melbourne's growing suburban footprint. The Ashburton line was extended along the old Outer Circle track formation to Alamein station in 1948. The Fawkner line to Upfield and the Reservoir line to Lalor were both electrified in 1959, the Epping line reaching Epping in 1964. A great deal of track amplification was also undertaken, with a number of single line sections eliminated.
The Upper Ferntree Gully to Belgrave section of the Gembrook narrow gauge line was converted to broad gauge and electrified in 1962. The remainder of the line was closed in 1954, but has been progressively reopened by the Puffing Billy Railway. The Pakenham line was electrified in 1954 as part of the works being carried out on the Gippsland line, but suburban services to Pakenham did not start until 1975.
During this rebuilding, a number of little used lines were closed on the edges of Melbourne. The Bittern to Red Hill line closed in 1953, the line between Epping and Whittlesea closed in 1959, and the Lilydale to Warburton line closed in 1964. The final stages of the rebuilding stretched into the 1970s, with track amplification carried out to Footscray, and Box Hill, and the first deliveries of the stainless steel Hitachi trains.
Detailed planning for the Doncaster line also commenced in this period, and by 1972 the route was decided upon. Despite rising costs, the state governments of the period continued to make assurances that the line would be built, but by 1984 land for the line had been sold.
By the 1970s, Melbourne's railway network was run down, with the last major investment on the suburban tracks having taken place nearly fifty years earlier. Sixty-year-old Tait trains (known colloquially as "red rattlers") were still in operation, and inner city congestion at Flinders Street led to peak hour delays. In February 1971, the Melbourne Underground Rail Loop Act was passed, establishing the Melbourne Underground Rail Loop Authority (MURLA) to build a connecting series of tunnels from the major stations along the north, south, east and west extremities of the Melbourne CBD. The project ran for over 14 years, opening progressively between 1981 and 1985. The loop was designed and constructed to improve the capacity of Flinders Street and Spencer Street stations to handle suburban trains and to offer easier connections for users.
Other major changes took place in 1976 when the government authority overseeing Victorian Railways became VicRail and was gradually restructured along corporate lines. Following the restructure, in 1980 the Victorian Transport Study, better known as the Lonie Report, was delivered and called for financial rationalisation. The closure of the Port Melbourne, St. Kilda, Altona, Williamstown, Alamein and Sandringham lines was also recommended, along with their replacement with bus routes instead. These recommendations and cuts were not enacted, however many uneconomical branch lines were closed throughout the rest of the state. The line between Lilydale and Healesville was closed in 1980, now used by the Yarra Valley Railway beyond Yarra Glen. The branch from Baxter to Mornington was closed in 1981, but the line south of Moorooduc is now operated by the Mornington Railway as a tourist route.
The Metrol train control centre was opened in 1980 to coordinate trains throughout the network using computer software that remains in use today. Public transport in Melbourne was also reorganised, with the Metropolitan Transit Authority (MTA) formed in 1983 to coordinate all train, tram and bus services in the city to improve interoperability. With the electrification of the Werribee line in 1983, followed two years later by an extension of the Altona line to Laverton, and the City Loop in full operation by 1985, the last major modernisation of Melbourne's train lines in the 20th century was complete.
Isolated from the City Loop, the Port Melbourne and St Kilda lines were converted to standard gauge light rail in 1987 to accommodate tram routes 111 (now route 109) and 96. The route 96 remains one of the world's top 10 tram routes, and Melbourne's busiest.
The early 1990s saw further changes, with the MTA reborn as the Public Transport Corporation, trading as "The Met". The Metropolitan Transit Authority sought to better integrate travel, connections and ticketing across Melbourne's bus, train, and tram networks.
State Governments of both sides of politics began to push for reform of the railway network, proposing conversion of the Upfield, Williamstown and Alamein lines to light rail. These proposals failed, with the Upfield line instead receiving a series of upgrades to replace labour-intensive manual signalling systems. Federal government funding was made available for the electrification of the Cranbourne line, which was completed in 1995. Rationalisation of the Jolimont rail yard commenced, enabling the creation and expansion of Melbourne Park in 1988 and 1996, and the future construction of Federation Square in 2001.
Upon the Kennett Government's election in 1992, a number of controversial reforms to the operation of the railway system were initiated, with guards being abolished from suburban trains and train drivers taking over the task of door operation. Stations were de-manned, and the Metcard ticketing system was introduced to phase out the old scratch ticketing system. Over this period more than $250 million of operating cost was stripped from the Melbourne network, as the government sought to reign in growing state debt of $32 Billion.
In 1997 "The Met" was split into two operating units —Hillside Trains and Bayside Trains, each to be franchised to a different private operator. Ownership of land and infrastructure for rail and tram services was transferred to a new Victorian Government agency, VicTrack. In addition, a statutory office was created in Government—the Director of Public Transport—with specific responsibility for entering into franchise agreements with public transport operators for the operation of rail and tram services throughout Victoria. By 1999 the privatisation process was complete, with Connex Melbourne and M>Train each operating half of the network. By 2004 the parent company of M>Train (National Express) withdrew from operating public transport in Victoria, and their half of the suburban network was passed to Connex as part of a renegotiated contract.
In 2003, a union call was released that demanded the restaffing of all rail stations by 2006 for safety reasons.
The franchising contracts contained provisions for the new operators to refurbish the Comeng trains, and to replace the older Hitachi trains—Connex chose the Alstom X'Trapolis while M>Train chose Siemens. Since privatisation the Victorian Government has funded expansions to the suburban network—the electrification of the St. Albans line was extended to Watergardens (near the former Sydenham station) in 2002, and the Broadmeadows line was extended to Craigieburn in 2007.
In 2006, Professor Paul Mees and a group of academics estimated that privatisation had cost taxpayers $1.2 billion more than if the system had remained both publicly owned and operated. With the franchise extensions in 2009, taxpayers will pay an estimated $2.1 billion more by 2010. The Institute of Public Affairs has released its own report into Melbourne's privatisation citing it as a modest success and pointing out that patronage had returned to Melbourne's railways (37.6% increase) after ballooning deficits and the use of old rolling stock had deterred patronage . The Auditor General of Victoria also performed a comprehensive audit report into the franchises and found that "the franchises represent reasonable value for money".
In November 2007, Singapore's SMRT Transit and Hong Kong's MTR Corporation Limited expressed interest in taking control of Melbourne's suburban rail network from Connex in November 2009, when their contract was to be reviewed.
On 25 June 2009, Connex lost its bid to renew its contract with the Victorian Government. Hong Kong backed and owned MTR Corporation took over the Melbourne train network on 30 November 2009, operating as a locally themed consortium Metro Trains Melbourne. MTR is a non-public railway owner and operator in Hong Kong where it is well known for constructing Transit Oriented Developments (TODS) above and around its stations.
Beginning in the mid-2000s, a rapid increase in patronage of Melbourne's train network occurred. In the three-year period between financial year 2005 and 2008 rail patronage grew by 35 per cent. Trips grew from 148 million in 2004 to more than 200 million in 2008.
Transport Minister Lynne Kosky stated that the Government's A$10.5 billion, 10-year major transport plan, announced in May 2006 had significantly underestimated the usage rates of public transport. Original assessments had forecast increases of around 3-4%, far short of the 10% seen year-on-year. The State Government responded by purchasing new trains and introduced a new ticketing option that enabled commuters to pay a reduced fare if their journey finished by 7am.
In May 2005, the State Government commissioned a A$25 million study on the construction of a third track to the Dandenong line to increase capacity for a rapidly growing suburban area. The cost of the triplication process was expected to be as high as A$1 billion, as project activities included the organization of corresponding bus services for the rail line, changes to stations and platforms along the line, and the improvement of the signalling system. This project was ultimately sidelined and not delivered by the Brumby Government.
In 2008, the Brumby Government announced a $14.1 billion Victorian Transport Plan to augment Melbourne’s rail network. The plan included:
Following the investment announcement, the plan for the introduction of more than 200 new weekly train services was released to tackle overcrowding on the city's busiest train lines, a problem that had been attributed to a lack of trains and falling reliability.
On 1 May 2009 the State Government announced that they had committed $562.3 million in the 2009 State Budget for the extension of the Epping line 3.5 kilometres north to South Morang. Construction started in 2010 and was completed in 2012.
Since the mid-2000s, a number of level crossings that resulted from the rapid expansion of train lines in the 19th and 20th centuries have been slated for removal due to road traffic congestion and passenger and pedestrian safety. Successive Labor and Liberal state governments have funded or promised to fund the removal of level crossings, with 9 removed prior to 2014. A key election pledge from opposition leader Daniel Andrews in the 2014 Victorian state election was the full funding and removal of 50 of the most congested level crossings. Following election victory, the Labor Andrews Ministry established the Level Crossing Removal Authority in 2015 to oversee the project, which has subsequently removed over 15 crossings. As a result of these removals, many train lines are now partially grade separated below ground in 'trenches' or above ground on 'sky rail' bridges, and 8 stations have also been rebuilt.
On 27 March 2013, Public Transport Victoria published a document, detailing a 4-stage plan spread over the next 20 years to slowly redevelop Melbourne's rail network into that of a 'metro-style' network, by separating train lines and creating point-to-point lines, upgrading to high-capacity signalling and the order of new trains.
The Regional Rail Link was completed in June 2015, comprising a new railway line which cost $3.6 billion to provide new tracks to separate regional trains from Metro trains, and which increased capacity on the network.
A new train network map was released in 2016 with the consolidation and colour-coding of passenger services into 6 passenger lines.
The extension of the South Morang line, in line with the Victoria Transport Plan, was completed on 29 August 2018. The line was extended from South Morang to new stations at Middle Gorge, Hawkstowe, and a new terminus at a rebuilt Mernda station.
In July 2018 the Federal and State Governments each pledged A$5 billion (for a total of A$10 billion) to construct the long-awaited Airport rail link. The Federal Government proposed four preferred routes for the link, with one proposal running via a direct tunnel to Highpoint Shopping Centre and the others linking to existing stations in Broadmeadows, Flemington or Sunshine. The State Government assessment of the four preferred routes culminated in the route via Sunshine station being selected, with a detailed business case expected by 2020. Construction is expected to start prior to the 2022 Victorian State Election.
In August 2018, in the run-up to the 2018 Victorian state election, the Andrews Government pledged to complete a business case and secure funding to construct Australia's largest-ever railway infrastructure project: a rail loop through suburban Melbourne. The suburban loop is designed to help commuters connect easily to major suburban hubs and amenities such as hospitals, shopping centres, universities, and the airport. The service will connect almost all existing railway lines via one new loop running through middle suburbs, thus removing the necessity to travel into the city and out again as per the current hub and spoke rail network.
The line will connect the existing station at Cheltenham with other existing stations at Clayton, Glen Waverley, Heidelberg, Reservoir, Fawkner, Broadmeadows, Sunshines and Werribee. It will also link to new stations to be built in areas that have long been promised rail connections, including Monash University, Burwood, Box Hill, Doncaster, Bundoora and Melbourne Airport. Construction is expected to start by 2022 with sections progressively opening until the full line is operational in 2050. Public reaction and support for the proposal has been extremely positive.
The trains in Melbourne operate on 1,600 mm (5 ft 3 in) broad gauge track. The network is primarily at ground level, with more than 170 level crossings, and shared trackage with freight trains and V/Line regional services. The suburban network uses power catenary-style overhead wiring at 1500 volts DC.
All but a handful of the lines include at least one single-track section, and except for flyovers at North Melbourne, Burnley, and Camberwell, all junctions are flat junctions. These restrictions hinder the performance of the system, as delays tend to "knock on" to other services. Two lines have three-track sections (the centre line being signalled for two-way operation and used for up trains in the morning peak period and down trains at other times). Where two or more lines come together in the inner area, there are four or more tracks.
Operationally, the 16 lines are divided into four groups of lines. The Clifton Hill Group comprises the two lines that branch at Clifton Hill station. The Burnley Group comprises the four lines that go through Burnley station. The Caulfield Group comprises the three lines that go through Caulfield station, plus the Sandringham line. The Northern Group comprises the remaining lines, which all go through North Melbourne station.
The City Loop consists of four single-track underground lines, one for each group, allowing trains arriving in the city from each group to circle the central business district then head out again to a destination on the same group. Trains generally operate within one of the four groups, although there is some interworking between the Burnley and Clifton Hill groups and between the Caulfield and Northern Groups.
There are 212 stations in Melbourne, operated by Metro Trains Melbourne.
PRIDE Talking Box panel at East Camberwell station
PRIDE II Talking Box, detailing departures from Ginifer station
A network status board at Highett station
Timetable information is available to passengers at stations through the PRIDE II system, which is an electronic timetable and announcement system, and stands for Passenger Real-time Information Dissemination Equipment. The system consists of:
Control data comes from two locations: Metrol, and control stations. Next train data and times are automatically updated by the train control systems, with manual overrides also possible.
All stations are provided with "talking boxes" which have two buttons and a small speaker. The green button, when pressed, contacts the PRIDE controller over the rail telephone network, identifying itself by the DTMF tones that correspond to the ID number assigned to the box. The system then reads out times and destinations for the next two services to depart that platform (or, in the case of stations with a single island platform with departures either side, both platforms). The red button when pressed, gives the user two way communication with the closest control station.
Busy stations are often provided with an electronic LED PIDs, which indicate the destination, time, stopping pattern summary, and minutes to departure for the next train on the platform.
Stations on the City Loop, in addition to North Melbourne, Richmond, and Box Hill stations, have CRT screen PIDs, although some of these have recently been replaced by widescreen LCD screens. These displays show in detail the destination, scheduled and actual departure time, and all stations the next train stops at. Also shown is the destination and time of the following train, and the system is capable of providing suggested connections and warn of service interruptions.
On Sunday, 26 September 2010, the PRIDE system was upgraded with new voice announcements. The voice is now female, and now advises to touch on and off when using Myki.
As part of the Bayside Rail Upgrade, stations on the Frankston line will receive new "network status boards". These LCD screens provide travel information on all of Melbournes 16 railway lines as well as tram & bus services, including delays, replacement services or planned disruptions.
Most lines in Melbourne operate under an automatic block system of safeworking with three-position power signalling. This permits signals to operate automatically with the passage of trains, enforcing the distance between them. At junctions signals are manually controlled from signal boxes, with interlockings used to ensure conflicting paths are not set. The Flemington Racecourse line has two-position automatic signalling, a variant of the three-position system.
The outer end of the Hurstbridge line used to be operated with token based systems and two-position manual signalling, where access to the line is based upon possession of a token. It was dismantled in 2013.
Train stops are used to enforce stop indications on signals—should a train pass a signal, the train's brakes will automatically be applied. Trains are also fitted with pilot valves, a form of dead man's switch that applies the brakes should the driver fail to maintain a foot or hand pilot valve in a set position. The "VICERS" vigilance control and event recorder system is also being currently fitted to suburban trains to provide an additional level of safety.
The main control room for the rail network is Metrol. Located in the Melbourne CBD, it controls signals in the inner suburbs, tracking the location of all trains, as well as the handling the distribution of real time passenger information, and manages disruptions to the timetable. Additional signal boxes are located throughout the network, and in direct communication with Metrol.
The railways in Melbourne generally use British-derived terminology. For example:
Despite initially being constructed and operated as private railways in the 1850s, following the establishment of the government-owned Victorian Railways in 1858 Melbourne's suburban railway system has been state operated for the majority of its existence. In the 1920s Victorian Railways was operator of the world's busiest train station (Flinders Street) and one of the world's busiest railway networks. Following several high-profile collisions in the early 20th century, a number of network safety processes were implemented by the operator to improve passenger safety.
The agency name was shortened to VicRail in the early 1980s and then, later in the decade, the metropolitan system became known as Metropolitan Transit ('The Met') and the regional system became known as V/Line. In preparation for privatisation the suburban system was split into Bayside Trains and Hillside Trains by the Kennett Ministry in 1997. Privatisation was completed in 1999 and M-Train and Connex Melbourne won the tender to operate Bayside, and Hillside trains, respectively. Following M>Train's inability to renegotiate financial arrangements, in 2004 Connex Melbourne assumed responsibility for the entire network. Current operations are provided by Metro Trains Melbourne, an MTR Corporation joint venture.
Melbourne railways are built to 5 ft 3 in (1,600 mm) Irish broad gauge. Interstate lines and the tram system (including former railway lines converted to light rail) are 4 ft 8 1⁄2 in (1,435 mm) standard gauge. Some of these lines share track with regional lines, and also carry diesel-hauled passenger and goods trains to locations beyond the suburban network. Power is supplied by catenary-style overhead wiring at 1500 volts DC.
The majority of the current suburban train fleet in Melbourne is owned by VicTrack, with the train operator (currently Metro Trains Melbourne) responsible for maintaining the fleet. All trains on the Melbourne suburban network are electric and driver-only operated. Guards on suburban trains were discontinued between 1993 and 1995.
All trains are fitted with power-operated sliding doors which are closed by the driver, but opened by passengers. The doors of newer model X'Trapolis 100 and Siemens trains are opened electronically with a button, whilst Comeng trains are slid manually using handles. Trains are fitted with air conditioning, closed-circuit cameras, and emergency intercom systems. Trains are fixed into three car units and may operate alone or in pairs. All three train types in operation are unable to operate coupled to another type.
|Names||Alternate Names||Entered Service||Number Built||Key Information|
|Comeng||1981-1988||95 (6 Carriage)||Named as a 'Commonwealth Engineering' portmanteau. Refurbished 2000-2003 by EDI Rail and Alstom. Feature power operated doors that must be pulled open by hand but are closed automatically by the driver. First trains to feature air conditioning.|
|Siemens||Siemens Nexas||2003-2006||72 (3 Carriage)||Refurbished with seat removals and extra railings since 2016. The first and only openly articulated trains with passengers able to move between carriages without opening any doors. Frequent overrunning caused lawsuits and disruptions to fix alleged breaking faults.|
|180 (3 Carriage)
+32 Under Construction
|Body shells built in France, remaining assembled in Ballarat. Eight separate orders have been lodged for X'Trapolis trains. Remodelled since 2009 with 2+2 seat configurations to increase passenger capacity/flow.|
|High Capacity Metro Trains||2019||+65 Under Construction||For use on Melbourne Metro Rail Project line. Built in Changchun, China and Victoria using 60% local content. Currently in testing only, due to enter service mid-2019|
|Name||Alternate Names||Entered Service||Retired Service||Number Built||Key Information|
|Tait||Reds, Red Rattlers||1910||1974-1984||623||Named after Sir Thomas James Tait, Chairman of Commissioners of Victorian Railways. Converted to electric traction from 1919. Banned from City Loop due to fire hazard of wooden frame.|
|Harris||Blues||1956||1988-1994||?||Named after Norman Charles Harris, Chairman of Commissioners of the Victorian Railways. Contained asbestos and were burried in Clayton in the 1990s.|
|Hitachi||Martin & King, Stainless Steel||1972||2003-2014||118 (3 Carriage)||Named due to the design by Hitachi, despite no Hitachi components. The last Melbourne trains not to have air conditioning. Three Hitachi motor carriages form part of the restaurant Easey's in Collingwood.|
This article needs to be updated.(February 2018)
Since shortly after the introduction of suburban electric trains in Melbourne, their carriages have been classified as follows. All fleet types have used these classifications, with different fleet types using different number ranges for the carriages.
An exception to the above classifications was the trial double-deck train, which used T to indicate a trailer carriage with a driving compartment, and M to indicate a motorised carriage without a driving compartment.
Currently, all trains are assembled into a symmetrical M-T-M arrangement. Trains comprise either one or two such units. All peak period services and some off-peak services comprise two units. The now retired Hitachi trains operated in fixed two-unit sets.
Melbourne's suburban network includes 16 electrified lines and 1 non-electrified line. Many lines have been lengthened over time, most notably the Mernda line from Epping to South Morang in 2012 and again to Mernda in 2018. Lines have also changed terminus or layout, including the forthcoming changes to the Cranbourne, Pakenham and Sunbury lines as part of the Melbourne Metro Rail Project. Numerous proposals for new lines or extensions not yet constructed have been made, including the long-outstanding Doncaster railway line and Melbourne Airport rail link.
Suburban services are operated by Metro Trains Melbourne. Railway lines and service patterns are often classified into groups, which are:
Most of the above lines travel along the City Loop, and as some trains change to service other lines at their terminus, others may run through the City Loop incidentally. The Frankston line does not travel along the City Loop on off-peak weekdays, but does so during the peak and weekends.
Melbourne uses clock-face scheduling in off-peak periods, but generally not in rush hour, due to the network operating near to infrastructure capacity and having to accommodate single-line sections, flat junctions, and regional diesel-hauled trains. Frequencies vary according to time of day, day of week and by line. In some places, usually interchange stations, services on two lines combine to provide more frequent services on common sections of tracks. All services become 24 hour from Friday morning to Sunday evening, with at least one departure every hour after 12am.
The myki smart-card ticketing system is the main ticketing system currently in use across Melbourne, introduced in 2010. Prior to December 2012 Melbourne also used a magnetic strip paper ticket system known as the Metcard, first introduced to the railway network in 1996. On 29 December 2012 Metcard was no longer available for use on Melbourne's public transport and completely replaced by myki. Multi-modal tickets were first introduced in Melbourne in 1969 and prior to this train, tram and bus services all had separated ticketing systems.
V/Line regional services share tracks with several suburban train lines from the outskirts of Melbourne to the regional railway terminus at Southern Cross station (with the Traralgon V/Line rail service terminating at Flinders Street station). The Pakenham line has the longest shared track section which is used by V/Line services to the Latrobe Valley. The Werribee, Sunbury and Craigieburn lines also share lesser sections of track with counterpart suburban lines.
The Regional Rail Link project aimed to separate suburban services from all regional trains, except those to the North-East and the Latrobe Valley. A ceremonial start of construction was held in August 2009 and the project was completed in June 2015.
Melbourne also has an extensive network of railway lines and yards to serve freight traffic. The lines are of two gauges—5 ft 3 in (1,600 mm) broad gauge and 4 ft 8 1⁄2 in (1,435 mm) standard gauge, and are not electrified. In the inner western suburbs of the city, freight trains operate on dedicated lines, but in other areas freight trains share tracks with the suburban Metro Trains Melbourne and regional V/Line passenger services. The majority of freight terminals are located in the inner suburbs around Port of Melbourne, others are located between the Melbourne CBD and Footscray.
The prime rail statute in Victoria is the Transport Integration Act. The Act establishes the Department of Transport as the integration agency for Victoria's transport system. The Act also establishes and sets the charters of the state agencies charged with providing public transport rail services and managing network access for freight services, namely the Director of Public Transport and V/Line. In addition, the Act creates VicTrack which owns the public rail network and associated infrastructure. Another important statute is the Rail Management Act 1996 which confers powers on rail operators and provides for a rail access scheme for the state's rail network.
The safety of rail operations in Melbourne is regulated by the Rail Safety Act 2006 which applies to all commercial passenger and freight operations as well as tourist and heritage railways. The Act creates a framework containing safety duties for all rail industry participants and requires rail operators who manage infrastructure and rolling stock to obtain accreditation prior to commencing operations. Accredited rail operators are also required to have a safety management system to guide their operations.
Sanctions applying to the safety scheme established under the Rail Safety Act are contained in the Transport (Compliance and Miscellaneous) Act 1983. The safety regulator for the rail system in Melbourne is the Director, Transport Safety (trading as Transport Safety Victoria) whose office is established under the Transport Integration Act 2010.
Rail operators in Victoria can also be the subject of no blame investigations conducted by the Chief Investigator, Transport Safety or the Australian Transport Safety Bureau(ATSB). The Chief Investigator is charged by the Transport Integration Act with conducting investigations into rail safety matters including incidents and trends. ATSB, on the other hand, has jusridiction over the same matters where they occur on the Defined Interstate Rail Network.
Ticketing requirements for public transport in Melbourne are mainly contained in the Transport (Ticketing) Regulations 2006 and the Victorian Fares and Ticketing Manual. Rules about safe and fair conduct on trains and trams in Melbourne are generally contained in the Transport (Compliance and Miscellaneous) Act 1983 and the Transport (Conduct) Regulations 2005. If Metro does not reach its Punctuality and Delivery goals they will give out compensation to eligible customers. In the month of December 2014, Metro Trains had a delivery rate of 98.5%, and a Punctuality rate of 93.60%. In 2014, Metro Trains were accused of not stopping at underpopulated suburbs' stations in order to arrive on time, this practise has been condemned by the general public and the media. They have offered compensation to affected passengers.
Tourist and Heritage Railways in Melbourne and Victoria are currently governed by provisions in the Transport (Compliance and Miscellaneous) Act 1983. In future, they will be regulated by the recently enacted Tourist and Heritage Railways Act 2010, which commenced in October 2011.
None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, Wikipedia, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.
All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.
The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.