Published: 2012/07/27
Channel: TeddyComedy
4 Great Conversation Starters | Small Talk Tips and Tricks
4 Great Conversation Starters | Small Talk Tips and Tricks
Published: 2015/04/11
Channel: alpha m.
2 Mindsets, um im Smalltalk führen sofort beliebt zu werden
2 Mindsets, um im Smalltalk führen sofort beliebt zu werden
Published: 2017/07/14
Channel: RedeFabrik - Kommunikation & Charisma
How to Make Small Talk With Strangers | The Art of Manliness
How to Make Small Talk With Strangers | The Art of Manliness
Published: 2014/04/07
Channel: Art of Manliness
Smalltalk:  Getting started with the language
Smalltalk: Getting started with the language
Published: 2011/12/07
Channel: bwbadger
SMALL TALK | EP.1 | 1 เม.ย. 60 Full HD
SMALL TALK | EP.1 | 1 เม.ย. 60 Full HD
Published: 2017/04/01
Channel: Small Talk Thailand
SMALL TALK | EP.24 | 18 มิ.ย. 60 Full HD
SMALL TALK | EP.24 | 18 มิ.ย. 60 Full HD
Published: 2017/06/18
Channel: Small Talk Thailand
Wie man Smalltalk führt (richtig) — Doktor Allwissend
Wie man Smalltalk führt (richtig) — Doktor Allwissend
Published: 2016/08/01
Channel: Doktor Allwissend
ultraísta - smalltalk (Four Tet remix)
ultraísta - smalltalk (Four Tet remix)
Published: 2012/09/21
Channel: Ultraísta Ultraìsta
So hältst du besseren Smalltalk - Bedeutende Gespräche statt Oberflächlichkeit | Introvert Lifehacks
So hältst du besseren Smalltalk - Bedeutende Gespräche statt Oberflächlichkeit | Introvert Lifehacks
Published: 2016/12/18
Channel: Elliott Tender
3 Tipps um ins Gespräch zu kommen - Smalltalk lernen & Gespräche führen
3 Tipps um ins Gespräch zu kommen - Smalltalk lernen & Gespräche führen
Published: 2016/07/21
Channel: Joachim Jahn - Persönlichkeitsentwicklung
So gelingt der Small Talk mit der Traumfrau
So gelingt der Small Talk mit der Traumfrau
Published: 2013/10/07
Channel: focusonline
SMALL TALK | EP.11 | 6 พ.ค. 60 Full HD
SMALL TALK | EP.11 | 6 พ.ค. 60 Full HD
Published: 2017/05/08
Channel: Small Talk Thailand
Smalltalk lernen - Die 10 besten Tipps (inklusive Schritt-für-Schritt-Anleitung)
Smalltalk lernen - Die 10 besten Tipps (inklusive Schritt-für-Schritt-Anleitung)
Published: 2017/06/18
Channel: Joachim Jahn - Persönlichkeitsentwicklung
So hält man SMALL TALK!
So hält man SMALL TALK!
Published: 2016/10/02
Channel: So Geht Das
SMALL TALK | EP.25 | 25 มิ.ย. 60 Full HD
SMALL TALK | EP.25 | 25 มิ.ย. 60 Full HD
Published: 2017/06/25
Channel: Small Talk Thailand
Smalltalk lernen durch diese Tipps - Sympathisch wirken
Smalltalk lernen durch diese Tipps - Sympathisch wirken
Published: 2017/02/04
Channel: RedeFabrik - Kommunikation & Charisma
Worüber soll ich mit ihr / ihm reden - Gute Gesprächsthemen & Smalltalk lernen / Tipps
Worüber soll ich mit ihr / ihm reden - Gute Gesprächsthemen & Smalltalk lernen / Tipps
Published: 2016/07/24
Channel: Joachim Jahn - Persönlichkeitsentwicklung
How to Make Small Talk | The Distilled Man
How to Make Small Talk | The Distilled Man
Published: 2014/12/05
Channel: The Distilled Man
SMALL TALK | EP.15 | 20 พ.ค. 60 Full HD
SMALL TALK | EP.15 | 20 พ.ค. 60 Full HD
Published: 2017/05/21
Channel: Small Talk Thailand
SMALL TALK | EP.6 | 16 เม.ย. 60 Full HD
SMALL TALK | EP.6 | 16 เม.ย. 60 Full HD
Published: 2017/04/18
Channel: Small Talk Thailand
Ich trage keine Unterwäsche | Wer würde eher ? | Let
Ich trage keine Unterwäsche | Wer würde eher ? | Let's Smalltalk
Published: 2017/09/20
Channel: Let's Smalltalk
LOUD - Small Talk (Ozora Edit)
LOUD - Small Talk (Ozora Edit)
Published: 2013/04/30
Channel: EitanKobi LOUD
Memorable Monologue: Small Talk
Memorable Monologue: Small Talk
Published: 2014/06/05
Channel: TheEllenShow
MEUS PAIS! | Treine seu listening com SmallTalk #01
MEUS PAIS! | Treine seu listening com SmallTalk #01
Published: 2016/10/16
Channel: SmallAdvantages
Majid Jordan - Small Talk (Official Video)
Majid Jordan - Small Talk (Official Video)
Published: 2016/08/25
SMALL TALK | EP.25 | 24 มิ.ย. 60 Full HD
SMALL TALK | EP.25 | 24 มิ.ย. 60 Full HD
Published: 2017/06/24
Channel: Small Talk Thailand
How To Skip the Small Talk and Connect With Anyone | Kalina Silverman | TEDxWestminsterCollege
How To Skip the Small Talk and Connect With Anyone | Kalina Silverman | TEDxWestminsterCollege
Published: 2016/02/15
Channel: TEDx Talks
SMALL TALK | EP.2 | 2 เม.ย. 60 Full HD
SMALL TALK | EP.2 | 2 เม.ย. 60 Full HD
Published: 2017/04/02
Channel: Small Talk Thailand
SMALL TALK | EP.10 | 30 เม.ย. 60 Full HD
SMALL TALK | EP.10 | 30 เม.ย. 60 Full HD
Published: 2017/04/30
Channel: Small Talk Thailand
SMALL TALK | EP.14 | 14 พ.ค. 60 Full HD
SMALL TALK | EP.14 | 14 พ.ค. 60 Full HD
Published: 2017/05/14
Channel: Small Talk Thailand
SMALL TALK | EP.13 | 13 พ.ค. 60 Full HD
SMALL TALK | EP.13 | 13 พ.ค. 60 Full HD
Published: 2017/05/13
Channel: Small Talk Thailand
SMALL TALK | EP.9 | 29 เม.ย. 60 Full HD
SMALL TALK | EP.9 | 29 เม.ย. 60 Full HD
Published: 2017/04/29
Channel: Small Talk Thailand
SMALL TALK | EP.8 | 23 เม.ย. 60 Full HD
SMALL TALK | EP.8 | 23 เม.ย. 60 Full HD
Published: 2017/04/24
Channel: Small Talk Thailand
SMALL TALK | EP.4 | 9 เม.ย. 60 Full HD
SMALL TALK | EP.4 | 9 เม.ย. 60 Full HD
Published: 2017/04/09
Channel: Small Talk Thailand
SMALL TALK | EP.3 | 8 เม.ย. 60 Full HD
SMALL TALK | EP.3 | 8 เม.ย. 60 Full HD
Published: 2017/04/08
Channel: Small Talk Thailand
Small Talk - How to Start a Conversation - Tips and Tricks (animated)
Small Talk - How to Start a Conversation - Tips and Tricks (animated)
Published: 2017/01/05
Channel: Better Than Yesterday
SMALL TALK | EP.16 | 21 พ.ค. 60 Full HD
SMALL TALK | EP.16 | 21 พ.ค. 60 Full HD
Published: 2017/05/21
Channel: Small Talk Thailand
SMALL TALK | EP.5 | 15 เม.ย. 60 Full HD
SMALL TALK | EP.5 | 15 เม.ย. 60 Full HD
Published: 2017/04/18
Channel: Small Talk Thailand
Signs You
Signs You're Not Good At Small Talk
Published: 2014/05/29
Channel: BuzzFeedVideo
Breaking the Habit of Smalltalk | Omid Scheybani | TEDxKish
Breaking the Habit of Smalltalk | Omid Scheybani | TEDxKish
Published: 2015/06/11
Channel: TEDx Talks
SMALL TALK | EP.20 | 4 มิ.ย. 60 Full HD
SMALL TALK | EP.20 | 4 มิ.ย. 60 Full HD
Published: 2017/06/04
Channel: Small Talk Thailand
How To Make Small Talk
How To Make Small Talk
Published: 2014/08/19
Channel: Business Insider
SMALL TALK | EP.7 | 21 เม.ย. 60 Full HD
SMALL TALK | EP.7 | 21 เม.ย. 60 Full HD
Published: 2017/04/22
Channel: Small Talk Thailand
SMALL TALK | EP.22 | 11 มิ.ย. 60 Full HD
SMALL TALK | EP.22 | 11 มิ.ย. 60 Full HD
Published: 2017/06/12
Channel: Small Talk Thailand
SMALL TALK | EP.23 | 17 มิ.ย. 60 Full HD
SMALL TALK | EP.23 | 17 มิ.ย. 60 Full HD
Published: 2017/06/17
Channel: Small Talk Thailand
SMALL TALK | EP.18 | 28 พ.ค. 60 Full HD
SMALL TALK | EP.18 | 28 พ.ค. 60 Full HD
Published: 2017/05/28
Channel: Small Talk Thailand
SMALL TALK | EP.17 | 27 พ.ค. 60 Full HD
SMALL TALK | EP.17 | 27 พ.ค. 60 Full HD
Published: 2017/05/28
Channel: Small Talk Thailand
How To Get Good At Small Talk
How To Get Good At Small Talk
Published: 2016/09/19
Channel: ThinkTank
TINY HOUSE! | Treine seu listening com SmallTalk #05
TINY HOUSE! | Treine seu listening com SmallTalk #05
Published: 2016/12/05
Channel: SmallAdvantages
GO TO RESULTS [51 .. 100]


From Wikipedia, the free encyclopedia
Jump to: navigation, search
Paradigm Object-oriented
Designed by Alan Kay, Dan Ingalls, Adele Goldberg
Developer Alan Kay, Dan Ingalls, Adele Goldberg, Ted Kaehler, Diana Merry, Scott Wallace, Peter Deutsch and Xerox PARC
First appeared 1972; 45 years ago (1972) (development began in 1969)
Stable release
Smalltalk-80 version 2 / 1980; 37 years ago (1980)
Typing discipline Strong, dynamic
OS Cross-platform (multi-platform)
Major implementations
Amber, Dolphin Smalltalk, GemStone/S, GNU Smalltalk, Pharo, Smalltalk/X, Squeak, VA Smalltalk, VisualWorks
Influenced by
Lisp,[1] Simula,[1] Euler,[1] IMP,[1] Planner,[1] Logo,[2] Sketchpad,[1] ARPAnet,[1] Burroughs B5000,[1] cell (biology)[1]
AppleScript, Common Lisp Object System, Dart, Dylan, Erlang, Etoys, Falcon, Go, Groovy, Io, Ioke, Java, Lasso, Lisaac, Logtalk, NewtonScript, Object REXX, Objective-C, PHP 5, Perl 6, Python, Ruby, Scala, Scratch, Self

Smalltalk is an object-oriented, dynamically typed, reflective programming language. Smalltalk was created as the language to underpin the "new world" of computing exemplified by "human–computer symbiosis."[2] It was designed and created in part for educational use, more so for constructionist learning, at the Learning Research Group (LRG) of Xerox PARC by Alan Kay, Dan Ingalls, Adele Goldberg, Ted Kaehler, Scott Wallace, and others during the 1970s.

The language was first generally released as Smalltalk-80. Smalltalk-like languages are in continuing active development and have gathered loyal communities of users around them. ANSI Smalltalk was ratified in 1998 and represents the standard version of Smalltalk.[3]

Smalltalk took second place for "most loved programming language" in the Stack Overflow Developer Survey in 2017.[4]


There are a large number of Smalltalk variants.[5] The unqualified word Smalltalk is often used to indicate the Smalltalk-80 language, the first version to be made publicly available and created in 1980.

Smalltalk was the product of research led by Alan Kay at Xerox Palo Alto Research Center (PARC); Alan Kay designed most of the early Smalltalk versions, Adele Goldberg wrote most of the documentation, and Dan Ingalls implemented most of the early versions. The first version, known as Smalltalk-71, was created by Kay in a few mornings on a bet that a programming language based on the idea of message passing inspired by Simula could be implemented in "a page of code."[2] A later variant actually used for research work is now known as Smalltalk-72 and influenced the development of the Actor model. Its syntax and execution model were very different from modern Smalltalk variants.

After significant revisions which froze some aspects of execution semantics to gain performance (by adopting a Simula-like class inheritance model of execution), Smalltalk-76 was created. This system had a development environment featuring most of the now familiar tools, including a class library code browser/editor. Smalltalk-80 added metaclasses, to help maintain the "everything is an object" (except private instance variables) paradigm by associating properties and behavior with individual classes, and even primitives such as integer and boolean values (for example, to support different ways of creating instances).

Smalltalk-80 was the first language variant made available outside of PARC, first as Smalltalk-80 Version 1, given to a small number of firms (Hewlett-Packard, Apple Computer, Tektronix, and DEC) and universities (UC Berkeley) for "peer review" and implementation on their platforms. Later (in 1983) a general availability implementation, known as Smalltalk-80 Version 2, was released as an image (platform-independent file with object definitions) and a virtual machine specification. ANSI Smalltalk has been the standard language reference since 1998.[6]

Two of the currently popular Smalltalk implementation variants are descendants of those original Smalltalk-80 images. Squeak is an open source implementation derived from Smalltalk-80 Version 1 by way of Apple Smalltalk. VisualWorks is derived from Smalltalk-80 version 2 by way of Smalltalk-80 2.5 and ObjectWorks (both products of ParcPlace Systems, a Xerox PARC spin-off company formed to bring Smalltalk to the market). As an interesting link between generations, in 2001 Vassili Bykov implemented Hobbes, a virtual machine running Smalltalk-80 inside VisualWorks.[7] (Dan Ingalls later ported Hobbes to Squeak.)

During the late 1980s to mid-1990s, Smalltalk environments—including support, training and add-ons—were sold by two competing organizations: ParcPlace Systems and Digitalk, both California based. ParcPlace Systems tended to focus on the Unix/Sun microsystems market, while Digitalk focused on Intel-based PCs running Microsoft Windows or IBM's OS/2. Both firms struggled to take Smalltalk mainstream due to Smalltalk's substantial memory needs, limited run-time performance, and initial lack of supported connectivity to SQL-based relational database servers. While the high price of ParcPlace Smalltalk limited its market penetration to mid-sized and large commercial organizations, the Digitalk products initially tried to reach a wider audience with a lower price. IBM initially supported the Digitalk product, but then entered the market with a Smalltalk product in 1995 called VisualAge/Smalltalk. Easel introduced Enfin at this time on Windows and OS/2. Enfin became far more popular in Europe, as IBM introduced it into IT shops before their development of IBM Smalltalk (later VisualAge). Enfin was later acquired by Cincom Systems, and is now sold under the name ObjectStudio, and is part of the Cincom Smalltalk product suite.

In 1995, ParcPlace and Digitalk merged into ParcPlace-Digitalk and then rebranded in 1997 as ObjectShare, located in Irvine, CA. ObjectShare (NASDAQ: OBJS) was traded publicly until 1999, when it was delisted and dissolved. The merged firm never managed to find an effective response to Java as to market positioning, and by 1997 its owners were looking to sell the business. In 1999, Seagull Software acquired the ObjectShare Java development lab (including the original Smalltalk/V and Visual Smalltalk development team), and still owns VisualSmalltalk, although worldwide distribution rights for the Smalltalk product remained with ObjectShare who then sold them to Cincom.[8] VisualWorks was sold to Cincom and is now part of Cincom Smalltalk. Cincom has backed Smalltalk strongly, releasing multiple new versions of VisualWorks and ObjectStudio each year since 1999.

Cincom, Gemstone and Object Arts, plus other vendors continue to sell Smalltalk environments. IBM has 'end of life'd VisualAge Smalltalk having in the late 1990s decided to back Java and it is, as of 2006, supported by Instantiations, Inc.[9] which has renamed the product VA Smalltalk and released several new versions. The open Squeak implementation has an active community of developers, including many of the original Smalltalk community, and has recently been used to provide the Etoys environment on the OLPC project, a toolkit for developing collaborative applications Croquet Project, and the Open Cobalt virtual world application. GNU Smalltalk is a free software implementation of a derivative of Smalltalk-80 from the GNU project. Pharo Smalltalk is a fork of Squeak oriented towards research and use in commercial environments.

A significant development, that has spread across all current Smalltalk environments, is the increasing usage of two web frameworks, Seaside and AIDA/Web, to simplify the building of complex web applications. Seaside has seen considerable market interest with Cincom, Gemstone and Instantiations incorporating and extending it.


Smalltalk was one of many object-oriented programming languages based on Simula.[10] Smalltalk is also one of the most influential programming languages. Virtually all of the object-oriented languages that came after—Flavors,[11] CLOS, Objective-C, Java, Python, Ruby,[12] and many others—were influenced by Smalltalk. Smalltalk was also one of the most popular languages with the Agile Methods, Rapid Prototyping, and Software Patterns[13] communities. The highly productive environment provided by Smalltalk platforms made them ideal for rapid, iterative development.

Smalltalk emerged from a larger program of ARPA funded research that in many ways defined the modern world of computing. In addition to Smalltalk, working prototypes of things such as hypertext, GUIs, multimedia, the mouse, telepresence, and the Internet were developed by ARPA researchers in the 1960s.[14][15] Alan Kay (one of the inventors of Smalltalk) also described a tablet computer he called the Dynabook which resembles modern tablet computers like the iPad.[16]

Smalltalk environments were often the first to develop what are now common object-oriented software design patterns. One of the most popular is the Model–view–controller pattern for User Interface design. The MVC pattern enables developers to have multiple consistent views of the same underlying data. It's ideal for software development environments, where there are various views (e.g., entity-relation, dataflow, object model, etc.) of the same underlying specification. Also, for simulations or games where the underlying model may be viewed from various angles and levels of abstraction.[17]

In addition to the MVC pattern the Smalltalk language and environment were tremendously influential in the history of the Graphical User Interface (GUI) and the What You See Is What You Get (WYSIWYG) user interface, font editors, and desktop metaphors for UI design. The powerful built-in debugging and object inspection tools that came with Smalltalk environments set the standard for all the Integrated Development Environments, starting with Lisp Machine environments, that came after.[18]

Object-oriented programming[edit]

As in other object-oriented languages, the central concept in Smalltalk-80 (but not in Smalltalk-72) is that of an object. An object is always an instance of a class. Classes are "blueprints" that describe the properties and behavior of their instances. For example, a GUI's window class might declare that windows have properties such as the label, the position and whether the window is visible or not. The class might also declare that instances support operations such as opening, closing, moving and hiding. Each particular window object would have its own values of those properties, and each of them would be able to perform operations defined by its class.

A Smalltalk object can do exactly three things:

  1. Hold state (references to other objects).
  2. Receive a message from itself or another object.
  3. In the course of processing a message, send messages to itself or another object.

The state an object holds is always private to that object. Other objects can query or change that state only by sending requests (messages) to the object to do so. Any message can be sent to any object: when a message is received, the receiver determines whether that message is appropriate. Alan Kay has commented that despite the attention given to objects, messaging is the most important concept in Smalltalk: "The big idea is 'messaging'—that is what the kernel of Smalltalk/Squeak is all about (and it's something that was never quite completed in our Xerox PARC phase)."[19]

Smalltalk is a "pure" object-oriented programming language, meaning that, unlike Java and C++, there is no difference between values which are objects and values which are primitive types. In Smalltalk, primitive values such as integers, booleans and characters are also objects, in the sense that they are instances of corresponding classes, and operations on them are invoked by sending messages. A programmer can change or extend (through subclassing) the classes that implement primitive values, so that new behavior can be defined for their instances—for example, to implement new control structures—or even so that their existing behavior will be changed. This fact is summarized in the commonly heard phrase "In Smalltalk everything is an object", which may be more accurately expressed as "all values are objects", as variables are not.

Since all values are objects, classes themselves are also objects. Each class is an instance of the metaclass of that class. Metaclasses in turn are also objects, and are all instances of a class called Metaclass. Code blocks—Smalltalk's way of expressing anonymous functions—are also objects.[20]


Reflection is a term that computer scientists apply to software programs that have the capability to inspect their own structure, for example their parse tree or datatypes of input and output parameters. Reflection was first primarily a feature of interpreted languages such as Smalltalk and Lisp. The fact that statements are interpreted means that the programs have access to information created as they were parsed and can often even modify their own structure.

Reflection is also a feature of having a meta-model as Smalltalk does. The meta-model is the model that describes the language itself and developers can use the meta-model to do things like walk through, examine, and modify the parse tree of an object. Or find all the instances of a certain kind of structure (e.g., all the instances of the Method class in the meta-model).

Smalltalk-80 is a totally reflective system, implemented in Smalltalk-80 itself. Smalltalk-80 provides both structural and computational reflection. Smalltalk is a structurally reflective system whose structure is defined by Smalltalk-80 objects. The classes and methods that define the system are themselves objects and fully part of the system that they help define. The Smalltalk compiler compiles textual source code into method objects, typically instances of CompiledMethod. These get added to classes by storing them in a class's method dictionary. The part of the class hierarchy that defines classes can add new classes to the system. The system is extended by running Smalltalk-80 code that creates or defines classes and methods. In this way a Smalltalk-80 system is a "living" system, carrying around the ability to extend itself at run time.

Since the classes are themselves objects, they can be asked questions such as "what methods do you implement?" or "what fields/slots/instance variables do you define?". So objects can easily be inspected, copied, (de)serialized and so on with generic code that applies to any object in the system.[21]

Smalltalk-80 also provides computational reflection, the ability to observe the computational state of the system. In languages derived from the original Smalltalk-80 the current activation of a method is accessible as an object named via a pseudo-variable (one of the six reserved words), thisContext. By sending messages to thisContext a method activation can ask questions like "who sent this message to me". These facilities make it possible to implement co-routines or Prolog-like back-tracking without modifying the virtual machine. The exception system is implemented using this facility. One of the more interesting uses of this is in the Seaside web framework which relieves the programmer of dealing with the complexity of a Web Browser's back button by storing continuations for each edited page and switching between them as the user navigates a web site. Programming the web server using Seaside can then be done using a more conventional programming style.[22]

An example of how Smalltalk can use reflection is the mechanism for handling errors. When an object is sent a message that it does not implement, the virtual machine sends the object the doesNotUnderstand: message with a reification of the message as an argument. The message (another object, an instance of Message) contains the selector of the message and an Array of its arguments. In an interactive Smalltalk system the default implementation of doesNotUnderstand: is one that opens an error window (a Notifier) reporting the error to the user. Through this and the reflective facilities the user can examine the context in which the error occurred, redefine the offending code, and continue, all within the system, using Smalltalk-80's reflective facilities.[23][24]

By creating a class that understands (implements) only doesNotUnderstand:, one can create an instance that can intercept any message sent to it via its doesNotUnderstand: method. Such instances are called transparent proxies[25]. Such proxies can then be used to implement a number of facilities such as distributed Smalltalk where messages are exchanged between multiple Smalltalk systems, database interfaces where objects are transparently faulted out of a database, promises, etc. The design of distributed Smalltalk influenced such systems as CORBA.


Smalltalk-80 syntax is rather minimalist, based on only a handful of declarations and reserved words. In fact, only six "keywords" are reserved in Smalltalk: true, false, nil, self, super, and thisContext. These are actually called pseudo-variables, identifiers that follow the rules for variable identifiers but denote bindings that the programmer cannot change. The true, false, and nil pseudo-variables are singleton instances. self and super refer to the receiver of a message within a method activated in response to that message, but sends to super are looked up in the superclass of the method's defining class rather than the class of the receiver, which allows methods in subclasses to invoke methods of the same name in superclasses. thisContext refers to the current activation record. The only built-in language constructs are message sends, assignment, method return and literal syntax for some objects. From its origins as a language for children of all ages, standard Smalltalk syntax uses punctuation in a manner more like English than mainstream coding languages. The remainder of the language, including control structures for conditional evaluation and iteration, is implemented on top of the built-in constructs by the standard Smalltalk class library. (For performance reasons, implementations may recognize and treat as special some of those messages; however, this is only an optimization and is not hardwired into the language syntax.)

The adage that "Smalltalk syntax fits on a postcard" refers to a code snippet by Ralph Johnson, demonstrating all the basic standard syntactic elements of methods:[26]

exampleWithNumber: x
    | y |
    true & false not & (nil isNil) ifFalse: [self halt].
    y := self size + super size.
    #($a #a "a" 1 1.0)
        do: [ :each |
            Transcript show: (each class name);
                       show: ' '].
    ^x < y


The following examples illustrate the most common objects which can be written as literal values in Smalltalk-80 methods.

Numbers. The following list illustrates some of the possibilities.


The last two entries are a binary and a hexadecimal number, respectively. The number before the 'r' is the radix or base. The base does not have to be a power of two; for example 36rSMALLTALK is a valid number equal to 80738163270632 decimal.

Characters are written by preceding them with a dollar sign:


Strings are sequences of characters enclosed in single quotes:

'Hello, world!'

To include a quote in a string, escape it using a second quote:

'I said, ''Hello, world!'' to them.'

Double quotes do not need escaping, since single quotes delimit a string:

'I said, "Hello, world!" to them.'

Two equal strings (strings are equal if they contain all the same characters) can be different objects residing in different places in memory. In addition to strings, Smalltalk has a class of character sequence objects called Symbol. Symbols are guaranteed to be unique—there can be no two equal symbols which are different objects. Because of that, symbols are very cheap to compare and are often used for language artifacts such as message selectors (see below).

Symbols are written as # followed by a string literal. For example:


If the sequence does not include whitespace or punctuation characters, this can also be written as:



#(1 2 3 4)

defines an array of four integers.

Many implementations support the following literal syntax for ByteArrays:

#[1 2 3 4]

defines a ByteArray of four integers.

And last but not least, blocks (anonymous function literals)

[... Some smalltalk code...]

Blocks are explained in detail further in the text.

Many Smalltalk dialects implement additional syntaxes for other objects, but the ones above are the essentials supported by all.

Variable declarations[edit]

The two kinds of variables commonly used in Smalltalk are instance variables and temporary variables. Other variables and related terminology depend on the particular implementation. For example, VisualWorks has class shared variables and namespace shared variables, while Squeak and many other implementations have class variables, pool variables and global variables.

Temporary variable declarations in Smalltalk are variables declared inside a method (see below). They are declared at the top of the method as names separated by spaces and enclosed by vertical bars. For example:

| index |

declares a temporary variable named index which contains initially the value nil.

Multiple variables may be declared within one set of bars:

| index vowels |

declares two variables: index and vowels. All variables are initialized. Variables are initialized to nil except the indexed variables of Strings, which are initialized to the null character or ByteArrays which are initialized to 0.


A variable is assigned a value via the ':=' syntax. So:

vowels := 'aeiou'

Assigns the string 'aeiou' to the previously declared vowels variable. The string is an object (a sequence of characters between single quotes is the syntax for literal strings), created by the compiler at compile time.

In the original Parc Place image, the glyph of the underscore character (_) appeared as a left-facing arrow (like in the 1963 version of the ASCII code). Smalltalk originally accepted this left-arrow as the only assignment operator. Some modern code still contains what appear to be underscores acting as assignments, hearkening back to this original usage. Most modern Smalltalk implementations accept either the underscore or the colon-equals syntax.


The message is the most fundamental language construct in Smalltalk. Even control structures are implemented as message sends. Smalltalk adopts by default a synchronous, single dynamic message dispatch strategy (as contrasted to the asynchronous, multiple dispatch strategy adopted by some other object-oriented languages).

The following example sends the message 'factorial' to number 42:

42 factorial

In this situation 42 is called the message receiver, while 'factorial' is the message selector. The receiver responds to the message by returning a value (presumably in this case the factorial of 42). Among other things, the result of the message can be assigned to a variable:

aRatherBigNumber := 42 factorial

"factorial" above is what is called a unary message because only one object, the receiver, is involved. Messages can carry additional objects as arguments, as follows:

2 raisedTo: 4

In this expression two objects are involved: 2 as the receiver and 4 as the message argument. The message result, or in Smalltalk parlance, the answer is supposed to be 16. Such messages are called keyword messages. A message can have more arguments, using the following syntax:

'hello world' indexOf: $o startingAt: 6

which answers the index of character 'o' in the receiver string, starting the search from index 6. The selector of this message is "indexOf:startingAt:", consisting of two pieces, or keywords.

Such interleaving of keywords and arguments is meant to improve readability of code, since arguments are explained by their preceding keywords. For example, an expression to create a rectangle using a C++ or Java-like syntax might be written as:

new Rectangle(100, 200);

It's unclear which argument is which. By contrast, in Smalltalk, this code would be written as:

Rectangle width: 100 height: 200

The receiver in this case is "Rectangle", a class, and the answer will be a new instance of the class with the specified width and height.

Finally, most of the special (non-alphabetic) characters can be used as what are called binary messages. These allow mathematical and logical operators to be written in their traditional form:

3 + 4

which sends the message "+" to the receiver 3 with 4 passed as the argument (the answer of which will be 7). Similarly,

3 > 4

is the message ">" sent to 3 with argument 4 (the answer of which will be false).

Notice, that the Smalltalk-80 language itself does not imply the meaning of those operators. The outcome of the above is only defined by how the receiver of the message (in this case a Number instance) responds to messages "+" and ">".

A side effect of this mechanism is operator overloading. A message ">" can also be understood by other objects, allowing the use of expressions of the form "a > b" to compare them.


An expression can include multiple message sends. In this case expressions are parsed according to a simple order of precedence. Unary messages have the highest precedence, followed by binary messages, followed by keyword messages. For example:

3 factorial + 4 factorial between: 10 and: 100

is evaluated as follows:

  1. 3 receives the message "factorial" and answers 6
  2. 4 receives the message "factorial" and answers 24
  3. 6 receives the message "+" with 24 as the argument and answers 30
  4. 30 receives the message "between:and:" with 10 and 100 as arguments and answers true

The answer of the last message sent is the result of the entire expression.

Parentheses can alter the order of evaluation when needed. For example,

(3 factorial + 4) factorial between: 10 and: 100

will change the meaning so that the expression first computes "3 factorial + 4" yielding 10. That 10 then receives the second "factorial" message, yielding 3628800. 3628800 then receives "between:and:", answering false.

Note that because the meaning of binary messages is not hardwired into Smalltalk-80 syntax, all of them are considered to have equal precedence and are evaluated simply from left to right. Because of this, the meaning of Smalltalk expressions using binary messages can be different from their "traditional" interpretation:

3 + 4 * 5

is evaluated as "(3 + 4) * 5", producing 35. To obtain the expected answer of 23, parentheses must be used to explicitly define the order of operations:

3 + (4 * 5)

Unary messages can be chained by writing them one after another:

3 factorial factorial log

which sends "factorial" to 3, then "factorial" to the result (6), then "log" to the result (720), producing the result 2.85733.

A series of expressions can be written as in the following (hypothetical) example, each separated by a period. This example first creates a new instance of class Window, stores it in a variable, and then sends two messages to it.

 | window |
  window := Window new.
  window label: 'Hello'.
  window open

If a series of messages are sent to the same receiver as in the example above, they can also be written as a cascade with individual messages separated by semicolons:

  Window new
    label: 'Hello';

This rewrite of the earlier example as a single expression avoids the need to store the new window in a temporary variable. According to the usual precedence rules, the unary message "new" is sent first, and then "label:" and "open" are sent to the answer of "new".

Code blocks[edit]

A block of code (an anonymous function) can be expressed as a literal value (which is an object, since all values are objects.) This is achieved with square brackets:

[ :params | <message-expressions> ]

Where :params is the list of parameters the code can take. This means that the Smalltalk code:

[:x | x + 1]

can be understood as:


or expressed in lambda terms as:



[:x | x + 1] value: 3

can be evaluated as

Or in lambda terms as:

The resulting block object can form a closure: it can access the variables of its enclosing lexical scopes at any time. Blocks are first-class objects.

Blocks can be executed by sending them the value message (compound variations exist in order to provide parameters to the block e.g. 'value:value:' and 'valueWithArguments:').

The literal representation of blocks was an innovation which on the one hand allowed certain code to be significantly more readable; it allowed algorithms involving iteration to be coded in a clear and concise way. Code that would typically be written with loops in some languages can be written concisely in Smalltalk using blocks, sometimes in a single line. But more importantly blocks allow control structure to be expressed using messages and polymorphism, since blocks defer computation and polymorphism can be used to select alternatives. So if-then-else in Smalltalk is written and implemented as

expr ifTrue: [statements to evaluate if expr] ifFalse: [statements to evaluate if not expr]

True methods for evaluation
ifTrue: trueAlternativeBlock ifFalse: falseAlternativeBlock
^trueAlternativeBlock value False methods for evaluation
ifTrue: trueAlternativeBlock ifFalse: falseAlternativeBlock
^falseAlternativeBlock value
positiveAmounts := allAmounts select: [:anAmount | anAmount isPositive]

Note that this is related to functional programming, wherein patterns of computation (here selection) are abstracted into higher-order functions. For example, the message select: on a Collection is equivalent to the higher-order function filter on an appropriate functor.[27]

Control structures[edit]

Control structures do not have special syntax in Smalltalk. They are instead implemented as messages sent to objects. For example, conditional execution is implemented by sending the message ifTrue: to a Boolean object, passing as an argument the block of code to be executed if and only if the Boolean receiver is true.

The following code demonstrates this:

result := a > b
    ifTrue:[ 'greater' ]
    ifFalse:[ 'less or equal' ]

Blocks are also used to implement user-defined control structures, enumerators, visitors, pluggable behavior and many other patterns. For example:

| aString vowels |
aString := 'This is a string'.
vowels := aString select: [:aCharacter | aCharacter isVowel].

In the last line, the string is sent the message select: with an argument that is a code block literal. The code block literal will be used as a predicate function that should answer true if and only if an element of the String should be included in the Collection of characters that satisfy the test represented by the code block that is the argument to the "select:" message.

A String object responds to the "select:" message by iterating through its members (by sending itself the message "do:"), evaluating the selection block ("aBlock") once with each character it contains as the argument. When evaluated (by being sent the message "value: each"), the selection block (referenced by the parameter "aBlock", and defined by the block literal "[:aCharacter | aCharacter isVowel]"), answers a boolean, which is then sent "ifTrue:". If the boolean is the object true, the character is added to a string to be returned. Because the "select:" method is defined in the abstract class Collection, it can also be used like this:

| rectangles aPoint collisions |
rectangles := OrderedCollection
  with: (Rectangle left: 0 right: 10 top: 100 bottom: 200)
  with: (Rectangle left: 10 right: 10 top: 110 bottom: 210).
aPoint := Point x: 20 y: 20.
collisions := rectangles select: [:aRect | aRect containsPoint: aPoint].


This is a stock class definition:[28]

Object subclass: #MessagePublisher
    instanceVariableNames: ''
    classVariableNames: ''
    poolDictionaries: ''
    category: 'Smalltalk Examples'

Often, most of this definition will be filled in by the environment. Notice that this is actually a message to the "Object"-class to create a subclass called "MessagePublisher". In other words: classes are first-class objects in Smalltalk which can receive messages just like any other object and can be created dynamically at execution time.


When an object receives a message, a method matching the message name is invoked. The following code defines a method publish, and so defines what will happen when this object receives the 'publish' message.

    Transcript show: 'Hello World!'

The following method demonstrates receiving multiple arguments and returning a value:

quadMultiply: i1 and: i2
    "This method multiplies the given numbers by each other and the result by 4."
    | mul |
    mul := i1 * i2.
    ^mul * 4

The method's name is #quadMultiply:and:. The return value is specified with the ^ operator.

Note that objects are responsible for determining dynamically at runtime which method to execute in response to a message—while in many languages this may be (sometimes, or even always) determined statically at compile time.

Instantiating classes[edit]

The following code:

MessagePublisher new

creates (and returns) a new instance of the MessagePublisher class. This is typically assigned to a variable:

publisher := MessagePublisher new

However, it is also possible to send a message to a temporary, anonymous object:

MessagePublisher new publish

Hello World example[edit]

The Hello world program is used by virtually all texts to new programming languages as the first program learned to show the most basic syntax and environment of the language. For Smalltalk, the program is extremely simple to write. The following code, the message "show:" is sent to the object "Transcript" with the String literal 'Hello, world!' as its argument. Invocation of the "show:" method causes the characters of its argument (the String literal 'Hello, world!') to be displayed in the transcript ("terminal") window.

Transcript show: 'Hello, world!'.

Note that a Transcript window would need to be open in order to see the results of this example.

Image-based persistence[edit]

Most popular programming systems separate static program code (in the form of class definitions, functions or procedures) from dynamic, or run time, program state (such as objects or other forms of program data). They load program code when a program starts, and any prior program state must be recreated explicitly from configuration files or other data sources. Any settings the program (and programmer) does not explicitly save must be set up again for each restart. A traditional program also loses much useful document information each time a program saves a file, quits, and reloads. This loses details such as undo history or cursor position. Image based systems don't force losing all that just because a computer is turned off, or an OS updates.

Many Smalltalk systems, however, do not differentiate between program data (objects) and code (classes). In fact, classes are objects themselves. Therefore, most Smalltalk systems store the entire program state (including both Class and non-Class objects) in an image file. The image can then be loaded by the Smalltalk virtual machine to restore a Smalltalk-like system to a prior state.[29] This was inspired by FLEX, a language created by Alan Kay and described in his M.Sc. thesis.[30]

Smalltalk images are similar to (restartable) core dumps and can provide the same functionality as core dumps, such as delayed or remote debugging with full access to the program state at the time of error. Other languages that model application code as a form of data, such as Lisp, often use image-based persistence as well. This method of persistence is powerful for rapid development because all the development information (e.g. parse trees of the program) is saved which facilitates debugging. However, it also has serious drawbacks as a true persistence mechanism. For one thing, developers may often want to hide implementation details and not make them available in a run time environment. For legal reasons as well as for maintenance reasons, allowing anyone to modify the program at run time inevitably introduces complexity and potential errors that would not be possible with a compiled system that does not expose source code in the run time environment. Also, while the persistence mechanism is easy to use it lacks the true persistence capabilities needed for most multi-user systems. The most obvious is the ability to do transactions with multiple users accessing the same database in parallel.[31]

Level of access[edit]

Everything in Smalltalk-80 is available for modification from within a running program. This means that, for example, the IDE can be changed in a running system without restarting it. In some implementations, the syntax of the language or the garbage collection implementation can also be changed on the fly. Even the statement true become: false is valid in Smalltalk, although executing it is not recommended. When used judiciously, this level of flexibility allows for one of the shortest required times for new code to enter a production system.[citation needed]

Just-in-time compilation[edit]

Smalltalk programs are usually compiled to bytecode, which is then interpreted by a virtual machine or dynamically translated into machine-native code.

List of implementations[edit]

See also[edit]


  1. ^ a b c d e f g h i Kay, Alan; Stefan Ram (2003-07-23). "E-Mail of 2003-07-23". Dr. Alan Kay on the Meaning of “Object-Oriented Programming”. Retrieved 2009-01-03. 
  2. ^ a b c Kay, Alan. "The Early History of Smalltalk". Retrieved 2007-09-13. 
  3. ^ "™ | versions | ANSIStandardSmalltalk.html". Archived from the original on 2006-02-16. Retrieved 2013-06-25. 
  4. ^ Stack Overflow Developer Survey 2017
  5. ^ "Versions". Archived from the original on 2015-09-08. Retrieved 2007-09-13. 
  6. ^ "ANSI Smalltalk Standard". Archived from the original on 2015-09-07. Retrieved 2007-09-13. 
  7. ^ Hobbes
  8. ^ "History". Seagull Software. Archived from the original on 2002-08-06. Retrieved 2007-09-13. 
  9. ^ VisualAge Smalltalk Transition FAQ
  10. ^ The Simula language was also object-oriented and preceded (and was acknowledged as an influence on) Smalltalk but it was a simulation language, not a general purpose programming language.
  11. ^ Cannon, Howard. "Flavors A non-hierarchical approach to object-oriented programming" (PDF). Retrieved 17 December 2013. 
  12. ^ "About Ruby". Retrieved 17 December 2013. 
  13. ^ "Where Did Refactoring Come From?". Retrieved 17 December 2013. 
  14. ^ "DARPA / ARPA". Retrieved 16 December 2013. To meet this need, ARPA established the IPTO in 1962 with a mandate to build a survivable computer network to interconnect the DoD's main computers at the Pentagon, Cheyenne Mountain, and SAC HQ. 
  15. ^ "Engelbart's Role in Early Computer Networking". Retrieved 17 December 2013. 
  16. ^ Kay, Allen. "The Early History of Smalltalk". Retrieved 16 December 2013. 
  17. ^ Krasner, Glen; Stephen Pope (August–September 1988). "A Cookbook for Using the Model-View-Controller User Interface Paradigm in Smalltalk -80". Journal of Object-Oriented Programming. 
  18. ^ "Our Influence". Retrieved 16 December 2013. 
  19. ^ Kay, Alan (October 10, 1998). "Prototypes vs Classes (e-mail on Squeak list)". 
  20. ^ Goldberg, Adele; David Robson (1989). Smalltalk-80 The Language. Addison Wesley. pp. 31, 75–89. ISBN 0-201-13688-0. 
  21. ^ Clark, A.N. (1997). "Metaclasses and Reflection in Smalltalk". 
  22. ^ Ducasse, St ́ephane; Adrian Lienhard; Lukas Renggli. "Seaside – A Multiple Control Flow Web Application Framework" (PDF). Software Composition Group Institut f ̈ur Informatik und angewandte Mathematik Universitaat Bern, Switzerland. Retrieved 16 December 2013. 
  23. ^ Foote, Brian; Ralph Johnson (1–6 October 1989). "Reflective Facilities in Smalltalk-80". OOPSLA '89. Retrieved 16 December 2013. 
  24. ^ Smith, Brian C (1982-01-01). "PROCEDURAL REFLECTION IN PROGRAMMING LANGUAGES". MIT Technical Report (MIT-LCS-TR-272). Retrieved 16 December 2013. 
  25. ^ Denker, Marcus; Mariano Martinez Peck; Noury Bouraqadi; Luc Fabresse; St ́ephane Ducasse. "Efficient Proxies in Smalltalk" (PDF). 
  26. ^ [1] [2]
  27. ^ Goldberg, Adele; David Robson (1989). Smalltalk-80 The Language. Addison Wesley. pp. 17–37. ISBN 0-201-13688-0. 
  28. ^ Goldberg, Adele; David Robson (1989). Smalltalk-80 The Language. Addison Wesley. pp. 39–53. ISBN 0-201-13688-0. 
  29. ^ "Image-Based Persistence". Retrieved 17 December 2013. 
  30. ^ Kay, Allen (1968). "FLEX – A flexible extendable language". University of Utah MsC Thesis. 
  31. ^ Fowler, Martin. "Memory Image". Retrieved 17 December 2013. 
  32. ^ "Redline Smalltalk". Retrieved 2014-06-07. 
  33. ^ "Smalltalk/X - Object-oriented programming language | eXept AG". Retrieved 2013-06-25. 

Further reading[edit]

External links[edit]


None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, Wikipedia, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.

All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.

The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.

Powered by YouTube
Wikipedia content is licensed under the GFDL and (CC) license